100 150 | Makita 6226D, 6227D, 6228D instruction

c.That wire size is at least as large as the one specified in the table below.

Table 1: RECOMMENDED MINIMUM AWG SIZE FOR EXTENSION CORDS FOR BATTERY CHARGERS

Length of Cord (Feet)	25	50	100	150

AWG Size of Cord	18	18	18	16

9.Do not operate charger with damaged cord or plug - replace them immediately.

10.Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.

11.Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required, Incor- rect reassembly may result in a risk of electric shock or fire.

12.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off con- trols will not reduce this risk.

13.The battery charger is not intended for use by young children or infirm persons without supervision.

14.Young children should be supervised to ensure that they do not play with the bat- tery charger.

15.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possi- ble burns and even an explosion.

16.If electrolyte gets into your eyes, rinse them out with clear water and seek medi- cal attention right away. It may result in loss of your eyesight.

ADDITIONAL SAFETY RULES FOR CHARGER &

BATTERY CARTRIDGE

1.Do not charge Battery Cartridge when temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F).

2.Do not attempt to use a step-up trans- former, an engine generator or DC power receptacle.

3.Do not allow anything to cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery car- tridge is not used.

5.Do not short the battery cartridge:

(1)Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge to water or rain.

A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

6.Do not store the tool and Battery Car- tridge in locations where the temperature may reach or exceed 50°C (122°F).

6228D, 6227D, 6226D specifications

The Makita 6226D, 6227D, and 6228D cordless drill drivers are part of Makita's renowned lineup of power tools, catering to both professional tradespeople and DIY enthusiasts. These models are praised for their performance, versatility, and durability, making them an excellent choice for a wide range of applications.

One of the standout features of the Makita 6226D, 6227D, and 6228D is their compact and lightweight design. Weighing in at approximately 1.5 kilograms, these drill drivers are easy to handle, reducing user fatigue during extended periods of work. Their ergonomic handles provide a comfortable grip, allowing for improved control and precision.

All three models are equipped with a powerful motor capable of delivering high torque levels. The 6226D boasts a maximum torque of up to 30Nm, while the 6227D and 6228D offer even higher torque outputs, making them suitable for drilling into tougher materials. With variable speed settings and a two-speed gearbox, users can easily adjust their drilling speed for different tasks, ranging from delicate screw driving to heavy-duty drilling.

The technology integrated into these drill drivers sets them apart. Featuring Makita's innovative Lithium-Ion battery technology, users can expect longer run times and reduced charging times compared to traditional NiCad batteries. The 6226D, 6227D, and 6228D are compatible with Makita's extensive range of batteries, allowing for greater flexibility in the job site.

Another key characteristic is the built-in LED work light, which enhances visibility in low-light conditions, ensuring precision and accuracy in every task. The all-metal gear construction provides durability and reliability, extending the lifespan of the tool, while the motor’s electronic brake allows for quick and safe stops.

In terms of versatility, the Makita 6226D, 6227D, and 6228D feature a keyless chuck, enabling users to quickly change drill bits and attachments without the hassle of using a tool. This feature lends itself to efficient project management, allowing users to transition seamlessly between different drilling and driving tasks.

Overall, the Makita 6226D, 6227D, and 6228D models embody a perfect blend of power, convenience, and advanced technology, making them essential tools for any toolbox. Whether you are a construction professional or a home improvement enthusiast, these drill drivers are designed to meet the rigorous demands of various applications with ease.