AGFA DC-830 user manual Inserting the Batteries, Low Battery Indicator

Inserting the Batteries

The camera is powered by two AA-size alkaline batteries or rechargeable Ni-MH (min. 1600 mAh / 1.2V) batteries.

1.Slide the battery cover open.

2.Insert two AA-size alkaline batteries with the positive (+) and negative (-) poles matching the directions indicated inside the battery room.

3.Slide the battery cover closed.

Low Battery Indicator

A low battery indicator appears on the

LCD screen when the batteries are nearly exhausted. Batteries should be replaced promptly when the low batteries indicator appears.

CAUTION:

Risk of explosion if battery is replaced by an incorrect type dispose of used batteries

according to the instructions.

NOTE:

Do not use manganese batteries. Manganese batteries cannot supply sufficient power to support camera operation.

Replace all batteries at the same time. Never mix old and new batteries.

Remove batteries from the camera if you do not plan on using it for more than two weeks.

The camera body may feel warm after extended use. This is normal.

- 12 -