Friedrich CP12F10, CP10F10 Refrigerating Cycle, Capacitor Model Touch & Remote Control Type Model

Page 12

Disassembly

3. CAPACITOR

MODEL : TOUCH & REMOTE CONTROL TYPE MODEL

1.

Remove the control box.

 

2.

Remove the screw which fasten control panel from

 

 

control box.

 

3.

Remove the screw which located in the front.

 

4.

Open the bottom side of control box.

 

5.

Remove the screw and the clamp which fastens

 

 

the capacitor.

 

6.

Disconnect all the leads of capacitor terminals.

 

7.

Re-install the components by referring to the

Figure 10

 

removal procedure, above. (See Figure 10)

4. POWER CORD

1.Remove the control box.

2.Open the control box.

3.Disconnect the grounding screw from the control box.

4.Disconnect the 2 receptacles.

5.Remove a screw which fastens the clip cord.

(See Figure 11)

6. Remove the power cord.

 

7. Re-install the component by referring to the above

 

removal procedure, above.

 

(Use only one ground-marked hole for ground

 

connection.)

 

8. If the supply cord of this appliance is damaged, it

Figure 11

must be replaced by the special cord. (The

 

special cord means the cord which has the same

 

specification marked on the supply cord attached at

 

the unit.)

 

Refrigerating Cycle

CAUTION: Discharge the refrigerant system using a FreonTM Recovery System. If there is no valve to attach the recovery system, install one (such as a WATCO A-1) before venting the FreonTM. Leave the valve in place after servicing the system.

1.CONDENSER

1.Remove the cabinet.

2.Remove the 3 screws which fasten the

brace.

3. Remove the 3 screws which fasten the condenser and shroud.

4. After discharging the refrigerant completely, unbraze the interconnecting tube at the condenser connections.

5. Remove the condenser carefully.

6. Re-install the component by referring to notes. (See Figure 12)

Figure 12

12 Room Air Conditioner

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Room Air Conditioner Table of Contents Safety Precautions Plug in the power plug properly Do not clean the air conditioner with water Symbols Used in this Manual Outside DimensionsProduct Specifications This button can automatically control the air flow direction Disassembly Mechanical PartsAir Handling Parts AIR Guide and BlowerElectrical Parts MotorCapacitor Model Touch & Remote Control Type Model Refrigerating CycleEvaporator Pulling Vacuum Circuit Diagram Description QTYElectronic Control Device Troubleshooting Guide Piping SystemTroubleshooting Guide Unit runs but poor coolingFails to Start Electric Parts Troubleshooting Guide Compressor does not operate Romote controller does not operate Room AIR Conditioner Voltage Limits Troubleshooting Guide Complaint Cause Remedy Exploded Vi ew ReplacementParts list Use Factory Certified Parts

CP10F10, CP12F10 specifications

The Friedrich CP10F10 and CP12F10 are advanced portable air conditioning units designed to provide efficient and effective cooling solutions for both residential and commercial applications. These models stand out for their blend of performance, energy efficiency, and user-centric features.

One of the key characteristics of the Friedrich CP10F10 and CP12F10 is their robust cooling capabilities. The CP10F10 can deliver up to 10,000 BTU of cooling power, while the CP12F10 offers 12,000 BTU, making them suitable for spaces ranging from small offices to medium-sized rooms. The units are equipped with a high-efficiency rotary compressor that ensures rapid cooling while reducing energy consumption.

The cooling technology employed in these models focuses on quick temperature control and humidity reduction. Both units feature a multi-speed fan that allows users to customize airflow according to their comfort needs. This is complemented by a programmable thermostat, which enables precise temperature monitoring and adjustment, ensuring optimal indoor climate management.

In terms of design, the Friedrich CP series emphasizes portability and ease of use. Each model includes a convenient handle and durable caster wheels, allowing for effortless movement from room to room. The compact design ensures that the units can fit in various spaces without being intrusive, making them perfect for users who need flexibility.

Energy efficiency is another highlight of the CP10F10 and CP12F10. With an Energy Efficiency Ratio (EER) rating that often exceeds industry standards, these units help reduce electricity costs while maintaining effective cooling. The units utilize eco-friendly refrigerants, aligning with modern environmental standards and contributing to a smaller carbon footprint.

For user convenience, the Friedrich CP10F10 and CP12F10 are equipped with a range of features including a remote control, allowing for effortless operation from a distance. The digital display provides clear visibility of settings, and user-friendly controls make it easy to navigate through different modes such as cooling, fan, and dehumidification.

Furthermore, both models come with a built-in dehumidifier function, which is particularly useful in humid climates. This feature helps to maintain comfortable indoor air quality by reducing excess moisture, thus preventing mold growth and improving overall comfort.

In conclusion, the Friedrich CP10F10 and CP12F10 air conditioning units are ideal choices for individuals seeking reliable, portable, and energy-efficient cooling solutions. Their combination of powerful performance, innovative technologies, and user-friendly features makes them a standout option in the portable air conditioning market.
Top Page Image Contents