Makita 217D, 6237D instruction manual

Page 7

3.Do not allow anything to cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery car- tridge is not used.

5.Do not short the battery cartridge:

(1)Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge to water or rain.

A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

6.Do not store the tool and Battery Car- tridge in locations where the temperature may reach or exceed 50°C (122°F).

7.Do not incinerate the Battery Cartridge even if it is severely damaged or is com- pletely worn out. The battery cartridge can explode in a fire.

8.Be careful not to drop, shake or strike bat- tery.

9.Do not charge inside a box or container of any kind. The battery must be placed in a well ventilated area during charging.

SAVE THESE INSTRUCTIONS

7

Image 7
Contents Cordless Driver Drill 10 mm 3/8 SpecificationsWork Area General Safety RulesElectrical Safety Personal SafetyTool Use and Care Specific Safety RulesSymbols Additional Safety Rules for Charger & Battery Cartridge Page Functional Description Installing or removing battery cartridgeCharging Tips for maintaining maximum battery life Trickle charge Maintenance chargeSpeed change Switch actionReversing switch action Electric brakeSelecting action mode AssemblyAdjusting the fastening torque Operation Installing or removing driver bit or drill bitScrewdriving operation Drilling in wood Drilling operationDrilling in metal Model 6217D, 6317D only MaintenanceInstalling set plate optional accessory Replacing carbon brushesRecycling the Battery AccessoriesMemo Makita U.S.A., Inc Mail this Portion Factory Service Centers Makita Corporation of America