Makita 6018D, 6017D, 6019D instruction manual Assembly, Operation, Maintenance

Page 5

•Do not use the speed change lever while the tool is running. The tool may be damaged.

Adjusting the fastening torque (Fig. 5)

For model 6019D only

The fastening torque can be adjusted in 6 steps by turning the adjusting ring so that its graduations are aligned with the pointer on the tool body. The fastening torque is mini- mum when the number 1 is aligned with the pointer, and maximum when the marking is aligned with the pointer.

The clutch will slip at various torque levels when set at the number 1 to 5. The clutch is designed not to slip at the marking.

Before actual operation, drive a trial screw into your mate- rial or a piece of duplicate material to determine which torque level is required for a particular application.

NOTE:

•The adjusting ring does not lock when the pointer is positioned only halfway between the graduations.

•Do not operate the tool with the adjusting ring set

between the number 5 and the marking. The tool may be damaged.

ASSEMBLY

CAUTION:

•Always be sure that the tool is switched off and the bat- tery cartridge is removed before carrying out any work on the tool.

Installing or removing driver bit or drill bit (Fig. 6)

Hold the ring and turn the sleeve counterclockwise to open the chuck jaws.

Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clockwise to tighten the chuck.

To remove the bit, hold the ring and turn the sleeve coun- terclockwise.

When not using the driver bit, keep it in the bit holders. Bits 45 mm long can be kept there.

OPERATION

Screwdriving operation

For model 6017D/6018D

Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool. Release the trig- ger just as the screw bottoms out. If the trigger is not released, the screw may strip out the hole or the screw and/or bit may be damaged.

For model 6019D

Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger as soon as the clutch cuts in.

CAUTION:

•Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged.

NOTE:

•When driving wood screws, predrill pilot holes to make driving easier and to prevent splitting of the workpiece. See the chart.

Nominal diameter of

Recommended size of

wood screw

pilot hole

(mm)

(mm)

3.1

2.0 - 2.2

3.5

2.2 - 2.5

3.8

2.5 - 2.8

4.5

2.9 - 3.2

4.8

3.1 - 3.4

5.1

3.3 - 3.6

Drilling operation (Fig. 7)

First, turn the adjusting ring so that the pointer points to the marking (6019D). Then proceed as follows.

Drilling in wood

When drilling in wood, the best results are obtained with wood drills equipped with a guide screw. The guide screw makes drilling easier by pulling the bit into the workpiece.

Drilling in metal

To prevent the bit from slipping when starting a hole, make an indentation with a center-punch and hammer at the point to be drilled. Place the point of the bit in the indenta- tion and start drilling.

Use a cutting lubricant when drilling metals. The excep- tions are iron and brass which should be drilled dry.

CAUTION:

•Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool perfor- mance and shorten the service life of the tool.

•There is a tremendous force exerted on the tool/bit at the time of hole break through. Hold the tool firmly and exert care when the bit begins to break through the workpiece.

•A stuck bit can be removed simply by setting the reversing switch to reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly.

•Always secure small workpieces in a vise or similar hold-down device.

•If the tool is operated continuously until the battery car- tridge has discharged, allow the tool to rest for 15 min- utes before proceeding with a fresh battery.

MAINTENANCE

CAUTION:

•Always be sure that the tool is switched off and the bat- tery cartridge is removed before attempting to perform inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be per- formed by Makita Authorized Service Centers, always using Makita replacement parts.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 6017D 6018D 6019D Page Intended use SpecificationsSpecific Safety Rules GEB002-2 Functional Description CARTRIDGEENC004-1Operation AssemblyMaintenance Accessories Gebruiksdoeleinden Technische GegevensBeschrijving VAN DE Functies Bewaar Deze VoorschriftenBelangrijke Veiligheidsinstructies Voor ACCU’S Bediening Onderdelen AANBRENGEN/ VerwijderenOnderhoud AccessoiresGebruik als boor zie afb Boren in houtDéclaration DE Conformité CE EC-DECLARATION of ConformityLE Norme Della Comunità Europea EG-VERKLARING VAN ConformiteitEU-DEKLARATION OM Konformitet Declaração DE Conformidade DA CEEG-DEKLARATION OM Överensstämmelse Vakuutus EC-VASTAAVUUDESTAPour les pays d’Europe uniquement Bruit et vibrations For European countries only Noise and VibrationModello per l’Europa soltanto Rumore e vibrazione Alleen voor Europese landen Geluidsniveau en trillingKun for lande i Europa Lyd og vibration Só para países Europeus Ruído e vibraçãoEndast för Europa Buller och vibration Gjelder bare land i Europa Støy og vibrasjonPage Page Makita Corporation Anjo, Aichi, Japan

6018D, 6017D, 6019D specifications

The Makita 6019D, 6017D, and 6018D are robust cordless impact drivers renowned for their reliability and performance in various applications. Each model is designed to cater to different user needs while maintaining Makita's high standards for quality and durability.

The Makita 6019D stands out with its powerful motor and an impressive torque rating, making it ideal for heavy-duty tasks. This model features a compact design that enables users to work in tight spaces without compromising on performance. Moreover, its lightweight structure reduces user fatigue, allowing for extended use during prolonged projects. The 6019D is equipped with a variable speed control, enabling users to adjust the speed based on the specific requirements of the task, promoting precision and efficiency.

The Makita 6017D is recognized for its exceptional versatility and ergonomic design. It incorporates advanced technology such as an electronic brake for increased control and safety while working. The 6017D's lightweight design, combined with its thoughtful grip design, ensures comfort during extended use. This model also includes an integrated LED job light, illuminating the work area for improved visibility in low-light conditions. With a high-capacity battery, the 6017D offers excellent runtime, making it suitable for professionals and DIY enthusiasts alike.

On the other hand, the Makita 6018D boasts cutting-edge technology that enhances user convenience and performance. Featuring an efficient brushless motor, this model ensures longer runtime and increased productivity. The brushless technology also translates to less maintenance and a longer lifespan for the tool. The compact and lightweight design of the 6018D makes it a favorite for users who require a tool that is easy to handle without sacrificing power. Additionally, it offers multiple speed settings and a reverse function, adding versatility to different applications.

In summary, the Makita 6019D, 6017D, and 6018D are each distinguished by their unique features and advanced technologies. These impact drivers are engineered to meet the demands of various users, from professionals seeking high-performance tools to hobbyists looking for reliable equipment. With their user-friendly designs, powerful motors, and thoughtful features, these models underline Makita's commitment to excellence in the power tool industry. Whether it's construction, woodworking, or maintenance work, these impact drivers deliver exceptional performance and reliability.
Top Page Image Contents