Makita 6043D instruction manual Additional Safety Rules for Charger Tool

Page 5

IMPORTANT SAFETY INSTRUCTIONS FOR

CHARGER & BATTERY CARTRIDGE

USC003-1

1.SAVE THESE INSTRUCTIONS- This man- ual contains important safety and operat- ing instructions for battery charger.

2.Before using battery charger, read all instructions and cautionary markings on

(1)battery charger, (2) battery, and (3) product using battery.

3.CAUTION - To reduce risk of injury, charge only MAKITA rechargeable batteries. Other types of batteries may burst caus- ing personal injury and damage.

4.Do not expose charger to rain or snow.

5.Use of an attachment not recommended or sold by the battery charger manufac- turer may result in a risk of fire, electric shock, or injury to persons.

6.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

7.Make sure cord is located so that it will not be stepped on, tripped over, or other- wise subjected to damage or stress.

8.Do not operate charger with damaged cord or plug - replace them immediately.

9.Do not operate charger if it has received a sharp blow, been dropped, or otherwise

damaged in any way; take it to a qualified serviceman.

10.Do not disassemble charger or battery cartridge; take it to a qualified serviceman when service or repair is required. Incor- rect reassembly may result in a risk of electric shock or fire.

11.To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning. Turning off con- trols will not reduce this risk.

12.The battery charger is not intended for use by young children or infirm persons without supervision.

13.Young children should be supervised to ensure that they do not play with the bat- tery charger.

14.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possi- ble burns and even an explosion.

15.If electrolyte gets into your eyes, rinse them out with clear water and seek medi- cal attention right away. It may result in loss of your eyesight.

ADDITIONAL SAFETY RULES FOR CHARGER &

TOOL

1.The charger and the tool are specifically designed to work together. Do not attempt to charge any other cordless tool with this

charger. Do not attempt to charge the tool with any other charger.

5

Image 5
Contents Cordless Drill Work Area Electrical SafetyTool Use and Care Personal SafetySpecific Safety Rules Additional Safety Rules for Charger Tool 104F Reversing switch action Switch actionFunctional Description ChargingInstalling or removing driver bit or drill bit AssemblyOperation Screwdriving operationDrilling operation MaintenanceDrilling in wood Drilling in metalRemoving built-in battery Recycling the BatteryAccessories Memo Makita U.S.A., Inc Mail this Portion Factory Service Centers Makita Limited ONE Year Warranty