Friedrich CP06E10, CP08E10 manual Air Handling Parts, AIR Guide and Blower, FAN and Shroud

Page 11

www.sylvane.com 1-800-934-9194

Disassembly

Air HandlingParts

1. AIR GUIDE AND BLOWER

1.

Remove the front grille.

 

2.

Remove the cabinet.

 

3.

Remove the control box.

 

4.

Remove the 3 screws which fasten the brace.

 

5.

Remove the brace.

 

6.

Remove the 2 screws which fasten the evaporator.

 

7.

Move the evaporator forward and pulling it upward

 

 

slightly. (See Figure 20)

 

8.

Move the evaporator to the left carefully.

Figure 20

 

 

9.Pull out the hook of orifice by pushing the tabs and remove it. (See Figure 21)

10. Remove the clamp with a hand plier which secures the blower.

11. Remove the blower.

12. Remove the 4 screws which fasten the air guide from the barrier.

13. Move the air guide backward, pulling out from the base pan.

14. Re-install the components by referring to the removal procedure, above.

Figure 21

2. FAN AND SHROUD

1. Remove the cabinet.

2. Remove the brace.

3. Remove the 3 screws which fasten the condenser.

4. Move the condenser to the left carefully.

5. Remove the clamp which secures the fan.

6. Remove the fan and then pull out the shroud. (See Figure 22)

7. Re-install by referring to the removal procedure.

Figure 22

11 Room Air Conditioner

—7—

Image 11
Contents Room Air Conditioner Service and Parts Manual Table of Contents Be sure not to do Safety PrecautionsPlug in the power plug properly Do not clean the air conditioner with water Outside Dimensions DimensionsSymbols Used in this Manual 800 Product SpecificationsLocation and Function of Controls OperationAuto Swing Cabinet DisassemblyMechanical Parts Front GrilleFAN and Shroud Air Handling PartsAIR Guide and Blower Compressor Electrical PartsMotor Overload ProtectorCondenser Power CordRefrigerating Cycle CapacitorCapillary Tube EvaporatorPulling Vacuum Description QTY Circuit DiagramElectronic Control Device Components LocationFor Main P.W.B ASM Piping System Troubleshooting GuideUnit runs but poor cooling Troubleshooting GuideFails to Start Possible Trouble Electric Parts Troubleshooting GuideIC01M 0V? Is the voltage No.16 Room AIR Conditioner Voltage Limits Troubleshooting Guide Troubleshooting Guide Exploded View RoomAir Conditioner Use Factory Certified Parts
Related manuals
Manual 30 pages 24.51 Kb

CP06E10, CP08E10 specifications

Friedrich CP08E10 and CP06E10 are two high-performance portable air conditioning units designed to deliver effective cooling solutions for residential and commercial spaces. Renowned for their reliability, these models incorporate advanced features and technologies to ensure user comfort and ease of use.

One of the prominent features of both the CP08E10 and CP06E10 is their powerful cooling capacity. The CP08E10 has a cooling capacity of 8,000 BTUs, making it suitable for larger rooms up to 350 square feet, while the CP06E10 offers 6,000 BTUs of cooling, effectively accommodating areas up to 250 square feet. This versatility allows users to choose a model that best fits their specific room size and cooling needs.

Both units are equipped with a range of operating modes, including cooling, fan, and dehumidification. This versatility allows users to customize their environment based on preferences and seasonal conditions. The dehumidification function is particularly beneficial in humid climates, helping to remove excess moisture from the air while maintaining a comfortable temperature.

Energy efficiency is another critical aspect of the Friedrich CP08E10 and CP06E10. Both models possess an Energy Efficiency Ratio (EER) that results in reduced electricity consumption compared to conventional air conditioning systems. This not only saves money on heating and cooling bills but also minimizes the environmental impact, aligning with the growing demand for green technology.

In terms of design, the units feature a sleek and compact profile, making them easy to move and install. They come with caster wheels for portability, and the installation kit simplifies the setup process, ensuring users can quickly enjoy their cooling effects.

Comfort is enhanced through the inclusion of a programmable thermostat and remote control, allowing users to adjust settings from across the room conveniently. The units also feature multiple fan speeds, enabling precise control over airflow and noise levels, making them suitable for both daytime and nighttime use.

Lastly, maintenance is simplified thanks to the accessible filter, which can be easily cleaned and replaced as needed. This feature prolongs the lifespan of the units and ensures they maintain optimal performance throughout their use.

In summary, the Friedrich CP08E10 and CP06E10 combine powerful cooling capacities, energy efficiency, user-friendly features, and a compact design, making them ideal choices for anyone looking to enhance their indoor climate while maintaining convenience and comfort.