Installation Instructions
Unpacking
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials
�Remove and dispose of/recycle packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
�Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.
�Handle air conditioner gently.
1.Remove the air conditioner from the carton and place it on cardboard.
2.Remove shipping screws from the rear of the cabinet.
3.Remove the window lock bracket and screw from the air conditioner and set aside.
A 
B
A. Window lock bracket screw
B. Window lock bracket
4.Remove the ground screw and ground wire from the front of the air conditioner base. Save the ground screw.
A
B
A. Green ground wire
B. Ground screw
5.Pull on handles to slide air conditioner out of cabinet. Place air conditioner on cardboard.
A
A. Shipping screws | A |
| |
| A. Handles |
NOTE: Do not lift, push, pull or remove any expanded polystyrene (foam) from inside the air conditioner. It is not packing material.
6