Crestron electronic ST-DS manual Physical Description

Page 6

Docking Station/Charger

Crestron ST-DS

Physical Description

The ST-DS, shown on the next page, is housed in a black enclosure with silk- screened labels on the front panel and cavity (docking area) of the unit. On the front panel there are three LEDs for indicating the unit’s current status. The cavity accommodates either the ST-BTP with optional ST-DS charging guide or, in some cases, a Crestron wireless touchpanel with ST-BTP installed. The only wired connection is made to the bottom of the unit. There are four rubber feet on the base of the ST-DS for stability and to prevent slippage.

ST-DS Physical Views

SHOWN WITHOUT OPTIONAL

CHARGING GUIDE

6.715"

170.56mm

6.765"

171.83mm

0.935"

23.75mm

2 ∙ Docking Station/Charger: ST-DS

Operations Guide - DOC. 5738A

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Crestron Contents Page Description Functional DescriptionPhysical Description ST-DS Indicators ST-DS PortSetup Power SourceMethod 1 ST-BTP Alone Method 2 ST-BTP Installed in an Inactive Touchpanel Method 3 ST-BTP Installed in an Active Touchpanel Problem SolvingTroubleshooting Fully Discharging the ST-BTPFuture Updates Further InquiriesReturn and Warranty Policies Merchandise Returns / Repair ServiceCrestron Limited Warranty External 1500 mA Power Pack Memory EffectST-DS Optional Charging Guide This page intentionally left blank Operations Guide DOC a Docking Station/Charger ST-DS ∙ Crestron Electronics, Inc Operations Guide DOC a Crestron ST-DS
Top Page Image Contents