Important!
•Take care to avoid allowing the power contacts to become connected to each other, which creates a short.
•Regarding the installation of
Precautions
•Make sure your Battery Charger Car Mount Unit is turned off before connecting or disconnecting cables.
•Turn off the power before starting your vehicle engine.
•After you are finished using the Car Mounted Battery Charger, unplug it from the vehicle’s cigarette lighter socket. Leaving the Car Mounted Battery Charger plugged in creates the risk of damage to your vehicle or rundown of the vehicle’s battery.
•The Car Power Cable cigarette lighter plug may not fit the cigarette lighter sockets of certain 12/24V DC vehicles.
Precautions during Fuse Replacement
•The fuse within the Car Power Cable blows out when current exceeding the rated cur- rent flows to protect the Car Mounted Battery Charger from excessively high current. When the fuse has blown out, replace it by following the procedure described below.
1.Turn the cover on the end of the Power Cable plug in the
2.Replace the fuse (SOC Type TSC 125V 4A).
3.Return the cover to the end of the Power Cable plug.
Specifications of the Car Mounted Battery Charger
Each specification listed below is valid only for the Car Mounted Battery Charger consisted of HA-
A30CHG and
1. | Charging |
|
|
|
|
|
| Charging System | : |
|
|
|
|
| Charge time | : Approximately 8 hours (standard battery pack) |
|
|
|
|
|
| : Approximately 10 hours |
|
|
| |
2. | Car Power Cable |
|
|
|
|
|
| Model | : |
|
|
|
|
3. | Dimensions and Weight |
|
|
|
| |
| Dimensions | : Approximately 111(W) ⋅ 243(D) ⋅ 104(H)mm (43/ | "W ⋅ 99/ | 16 | "D ⋅ 41/ | "H) |
|
| 8 |
| 8 |
| |
| Weight | : Approximately 840g (29.43oz) (not including brackets) |
|
|
| |
4. | Operating Environment |
|
|
|
| |
| Temperature | : 0°C to 40°C (32°F to 104°F) |
|
|
|
|
| Humidity | :30% to 80% RH |
|
|
|
|
14
Page 14 | 04.4.21, 5:13 PM Adobe PageMaker 6.5J/PPC |