Specifications and Dimensions

Specifications
Environment
Ambient Operating	32 to 104 °F (0 to 40 °C)
Temperature	32 to 122 °F (0 to 50 °C) with derating
Cooling method	Forced convection
Humidity	95% maximum non-condensing at 104 °F
	(40 °C)
Storage Temperature	-40 to 122 °F (-40 to 50 °C)
Altitude	0 to 9,900ft (0 to 3000m). Derate 1% per 328ft
	(100m) between 3280ft (1000m) and 9,900ft
	(3000m)
Vibration	Tested in accordance with IEC 60068-2-6,
	2-29, 2-64
Mechanical Shock	In accordance with IEC 60068-2-27
Enclosure	NEMA 1 (IP 20), NEMA 12 (IP 54) through-panel
	mounting
Electromagnetic	In compliance with EN 61800-3 and
Immunity	EN 61000-6-2, and complies with
	EN61800-3 2nd environment with built-in filter
Electromagnetic	In compliance with EN61000-6-4 when the
Emissions	recommended RFI filter is used and EMC
	installation guidelines are followed
AC Supply
Requirements
Voltage	200 to 240Vac ±10%
	380 to 480Vac ±10%
	500 to 575Vac ±10%
	500 to 690Vac ±10%
Phase	3Ø (SP size Zero: 200 to 240V 1Ø or 3Ø)
Phase Imbalance	2% negative phase sequence (equivalent to 3%
	voltage imbalance between phases)
Frequency	48 to 65Hz
Input Power Factor	Displacement 0.97
Control
Carrier Frequency	3, 4, 6, 8, 12,16kHz - Panel Mount drives
	3, 4, 6kHz - Free Standing and SPM drives

Output Frequency	0 to 3000Hz (Open-loop)
Output Speed	0 to 40,000rpm (Closed-loop)
Frequency Accuracy	±0.01% of full scale
Frequency Resolution	0.001Hz
Analog Input	10 bit + sign (Qty 2); 16 bit + sign (Qty 1)
	resolution
Serial	2-wire RS485
Communications	4-wire RS232 or RS485 with SM-APPS module
	Protocol is ANSI x 3.28-2.5-A4, or Modbus RTU
	Baud rate 300 to 115,200
Braking	DC injection braking (stopping and holding) and
	dynamic braking transistor standard.
Control Power Ride	Up to 1 second depending on inertia and decel
Through	time
Protection
DC Bus	175 / 330 / 435Vdc (approximately
Undervoltage Trip	124 / 233 / 307Vac line voltage)
DC Bus	415 / 830 / 990Vdc (approximately 293 / 587 /
Overvoltage Trip	700Vac line voltage)
MOV Voltage	120 Joules, 1500Vdc clamping (line-to-line);
Transient Protection	140 Joules, 1815Vdc clamping (line-to-ground)
Drive Overload Trip	Current overload value is exceeded
	Programmable for Normal Duty or Heavy Duty,
	open-loop or closed-loop operation
Instantaneous	225% of drive rated current
Overcurrent Trip
Phase Loss Trip	DC bus ripple threshold exceeded
Overtemperature	Drive heatsink, control board, and option
Trips	module(s) monitoring
Short Circuit Trip	Protects against output phase to phase fault
Ground Fault Trip	Protects against output phase to ground fault
Motor Thermal Trip	Electronically protects the motor from
	overheating due to loading conditions

Dimensions

Size SP0

Size SP3

Size SP6

Weight 165.3lbs

12.2in (310mm)

12.2in (310mm)

44.5in (1131mm)

32.3in (820mm)

20.1in (510mm)

11.7in (298mm)

11.7in	11.7in
(298mm)	(298mm)

18	www.controltechniques.com