APC BR1000G manual Specifications, Replacement Battery, Service, Warranty

Page 8

Specifications

Replacement Battery

VA

1000 VA

Maximum Load

600 W

 

 

Nominal Input Voltage

120 V

 

 

Online Input Voltage Range

88 - 141 V

 

 

Automatic Voltage Regulation

(94-107) +11.2%

 

(126-141) -11.2%

 

 

Frequency Range

50/60 Hz ± 1 Hz

 

 

On-battery Waveshape

Step-approximated sine-wave

 

 

Typical Recharge Time

8 hours

 

 

Transfer Time

8 ms, maximum

 

 

Operating Temperature

0 to 40C (32 to 104F)

Storage Temperature

-5to 45C (23 to 113F)

Unit Dimensions

25 × 10 × 38.2 cm (9.84 × 3.93 × 15.0 in)

 

 

Unit Weight

10.7 kg (23.6 lbs)

 

 

Interface

USB

 

 

On-Battery Runtime

Go to: www.apc.com

 

 

EMI Classification

FCC / DOC Class B Certified

 

 

Approvals

TUV C-US, NOM

 

 

The battery cartridge typically lasts 3 to 6 years, a shorter period if subjected to frequent outages or elevated temperatures. Battery replacement part for Back-UPS Pro 1000 is APCRBC123. Please recycle spent battery cartridges.

Service

If the Back-UPS arrived damaged, notify the carrier.

If the Back-UPS requires service, do not return it to the dealer.

1.Consult the Troubleshooting section to eliminate common problems.

2.If the problem persists, go to http://www.apc.com/ support/.

3.If the problem still persists, contact APC Technical Support.

Have the Back-UPS model number, serial number and date of purchase available. Be prepared to troubleshoot the problem with an APC Technical Support representative. If this is not successful, APC will issue a Return Merchandise

Authorization (RMA) number and a shipping address.

Warranty

The standard warranty is three (3) years from the date of purchase. APC’s standard procedure is to replace the original unit with a factory reconditioned unit. Customers who must have the original unit back due to the assignment of asset tags and set depreciation schedules must declare such a need at first contact with an APC Technical Support representative. APC will ship the replacement unit once the defective unit has been received by the repair department, or cross-ship upon the receipt of a valid credit card number. The customer pays for shipping the unit to APC. APC pays ground freight transportation costs to ship the replacement unit to the customer.

APC Worldwide Customer Support

Internet

http://www.apc.com

Worldwide

+1 888 272-3858

Customer support and warranty information is available at the APC Web site, www.apc.com.

© 06/2010 American Power Conversion. All rights reserved. All APC trademarks are property of American Power

Conversion. Other trademarks are property of their respective owners.990-3804A6/2010

Image 8
Contents Install PowerChute Personal Edition Software InventorySafetyConnect the battery Master and Controlled outlets Battery Backup and Surge Protected outletsConnect the equipment Power-Saving Function Power-Saving DisplayOperation Unit sensitivityFront Panel Buttons and Display Interface Front panelSystem Faults If these icons are This may be the problem IlluminatedAudible Warnings F01Function Button Quick-Reference Function Button TimingDescription SecondsTroubleshooting Problem Possible Cause Corrective ActionSpecifications Replacement BatteryService Warranty