INSTRUCTION MANUAL
FOR
FLEXIDYNE® Couplings
Sizes 9C and 11C
WARNING: Because of the possible danger to persons(s) or property from accidents which may result from the improper use of products, it is important that correct procedures be followed. Products must be used in accordance with the engineering information specified in the catalog. Proper installation, maintenance and operation procedures must be observed. The instructions in the instruction manuals must be followed. Inspections should be made as necessary to assure safe operation under prevailing conditions. Proper guards and other suitable safety devices or procedures as may be desirable or as may be specified in safety codes should be provided, and are neither provided by Baldor Electric Company Automaton nor are the responsibility of Baldor Electric Company. This unit and its associated equipment must be installed, adjusted and maintained by qualified personnel who are familiar with the construction and operation of all equipment in the system and the potential hazards involved. When risk to persons or property may be involved, a holding device must be an integral part of the driven equipment beyond the speed reducer output shaft.
www.baldor.com www.ptplace.com
Baldor Electric Company Headquarters
P.O. Box 2400, Fort Smith, AR
DODGE/Reliance Division
6040 Ponders Court, Greenville, SC
IM499872 04/07 | Copyright © 2007 Baldor Electric Company | All Rights Reserved. Printed in USA. |
This material is not intended to provide operational instructions. Appropriate instruction manuals and precautions should be studied prior to installation, operation or maintenance of equipment.