Uniden 24-148 manual Storing Phone Numbers and Names, With the Handset

Storing Phone Numbers and Names

Memory Dialing allows you to dial a number using just a few key strokes. Your 24-148 stores up to 20 names/numbers in the handset.

With the Handset					In memory dialing
1	Press and hold	until “Memory Store“		Memory Store	operation, you must press
	is displayed.		01		a key within 20 seconds or
					the phone will return
			02
2 Press • and ª		or enter a two-digit number (01 - 20) to select the memory			to standby. If you return
					the handset to the base,
	location where you would like to store the number.				the phone will return
3					to standby also.
	Press	. The following screen appears and a		Store Name
	cursor flashes indicating that the display is ready for
	the name to be entered.
	If this screen appears, the selected memory location is			Edit Memory07
	already stored. Then you must either change the entry			Delete Memory07
	in this location, clear the entry in this location, or			Go Back
	select “Go Back“ to choose another location.

4Use number keys, , , or to enter the name. The name cannot exceed 13 characters.

•See the “Steps for entering names and special characters “ . (See pages 23-24)

•Use and to move the cursor to the desired location.

•Use to delete characters as needed.

•Press and hold to delete all the characters.

•If a name is not required, go to step 5. <Memory XX> will be stored as the name (XX is the location number you selected).

M E M O RY D I A L I N G [ 21 ]

MEMORY DIALING