Kawasaki 843327 Personal Safety, Tool USE and Care, Service, Specific Safety Rules AND/OR Symbols

Page 4

PERSONAL SAFETY

Stay alert, watch what you are doing, and use common sense when operat- ing a power tool. Do not use tool while tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enable better control of the tool in unexpected situations.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safe- ty shoes, hard hat, or hearing protection must be used for appropriate conditions..

TOOL USE AND CARE

Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if the power switch does not turn it “ON” or “OFF”. Any tool that can- not be controlled with the power switch is dangerous and must be replaced.

Disconnect the power cord plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safe- ty measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained

tools.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or

maintenance by unqualified personnel may result in a risk of injury.

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

Keep hands away from cutting area and blade. Keep your second hand on auxiliary handle or motor housing. If both hands are holding the saw, they

cannot be cut by the blade.

Keep your body positioned to either side of the saw blade, but not in line with the saw blade. KICKBACK could cause the saw to jump backwards (See

“Causes and Prevention of Kickback”).

Do not reach underneath the work. The guard cannot protect you from the blade below the work.

Check lower guard for proper closing before each use. Do not operate saw if lower guard does not move freely and close instantly. Never clamp or tie lower guard into the open position. If saw is accidentally dropped, lower guard may be bent. Raise the lower guard with the Retracting Handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut.

Check the operation and condition of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use. Lower guard may operate sluggishly due to damaged parts, gummy deposits, or a buildup of debris.

5

6

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 4 Circular SAW Table of Contents General Safety Rules for ALL Electric Power ToolsRecognize Safety SYMBOLS, Words and Labels CongratulationsElectrical Safety Important SafeguardsWork Area Personal Safety ServiceSpecific Safety Rules AND/OR Symbols Tool USE and CareSafety of operation Safety Rules for Circular SawsBolts or blade washers can cause injury Could cause serious personal injurySymbols Symbol Name ExplanationAccessories Functional DescriptionAssembly Cutting Depth AdjustmentAttaching / Removing Blade Mounting the RIP FenceBevel Angle Adjustment Laser SafetyOperation Accessible Fields Laser GuideOperating the on / OFF Switch Operating the LaserOperating the Circular SAW General CuttingCutting Materials Thicker than 1/4 3/4 Maximum Thickness Cutting Thin or Corrugated MaterialsCutting Large Sheets Pocket CuttingMaintenance and Cleaning Laser MaintenanceAccessories SpecificationsYear Limited Warranty Other Consumer DO-IT-YOURSELF DIY ToolsCircular Saws Tools Angle Grinders Commercial or Rental PurposeWarranty Disclaimers

843327 specifications

The Kawasaki 843327 is an exceptional piece of machinery that has gained recognition for its reliability and robust performance in various applications. Engineered for both durability and efficiency, it is primarily designed for a range of agricultural and industrial tasks, making it a versatile addition to any operation.

One of the standout features of the Kawasaki 843327 is its powerful engine, which offers impressive horsepower and torque. This strong engine allows for smooth operation, even when faced with demanding workloads. The unit operates with remarkable fuel efficiency, minimizing downtime for refueling and maximizing productivity. This balance of power and efficiency is particularly beneficial for users who require sustained performance throughout their workday.

Technology plays a pivotal role in the design of the Kawasaki 843327. The machine is equipped with advanced controls that enhance user experience and operational effectiveness. The intuitive interface allows for easy manipulation of various functions, making it accessible for operators of varying skill levels. Additionally, it incorporates precision engineering, ensuring that all components work harmoniously to deliver consistent results in any environment.

Durability is another hallmark of the Kawasaki 843327. Constructed with high-quality materials, this unit is designed to withstand the rigors of heavy use. The robust build helps prevent common wear and tear, significantly extending the lifespan of the machinery. Furthermore, it features protective casing and components that shield vital parts from environmental damage, ensuring long-term reliability in harsh conditions.

Another key characteristic is the machine's adaptability. The Kawasaki 843327 can handle a range of attachments and implements, enhancing its multifunctional capabilities. This adaptability makes it suitable for various tasks, such as tilling, hauling, and plowing, which are common in agricultural settings, as well as in construction and landscaping projects.

Regular maintenance is simplified with the Kawasaki 843327, as it is designed for easy access to vital components. Routine checks and service can be executed quickly and efficiently, which helps in maintaining optimal performance and reducing unnecessary downtime.

In summary, the Kawasaki 843327 is a power and efficiency-driven machine that excels in various environments. With advanced technology, robust construction, and versatile adaptability, it remains a top choice for professionals seeking a reliable partner for their toughest tasks.
Top Page Image Contents