Position yourself to avoid being caught between the tool or side handle and walls or posts. Should the socket or bit become bound in the work, the reac- tion torque of the tool could crush your hand or leg.
Check to see that keys and adjusting wrenches are removed from the Cordless Drill before switching the tool “ON”. Keys or wrenches can fly away at high velocity striking you or a bystander.
When using the Cordless Drill, always maintain a firm grip on the tool with both hands.
Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.
Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.
Do not run the Cordless Drill while carrying it at your side. A spinning socket or bit could become entangled with clothing and injury may result.
Disconnect the plug or remove the battery pack from tool and place the switch in the locked or “OFF” position before making any assembly adjustments, changing accessories, performing any inspection, maintenance or cleaning procedures. Such preventive safety measures reduce the risk of starting the tool accidentally.
Do not use the Cordless Drill if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.
Maintain labels and nameplates on the Cordless Drill. These carry important information. If unreadable or missing, contact Alltrade for a replacement.
SYMBOLS
IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL | NAME | EXPLANATION | ||||||
|
| V | Volts | Voltage (Potential) | ||||
|
| A | Amperes | Current | ||||
| Hz | Hertz | Frequency (Cycles per Second) | |||||
| W | Watt | Power | |||||
| Kg | Kilograms | Weight | |||||
|
|
|
|
|
|
| Alternating Current | Type of Current |
|
|
|
|
|
|
| Direct Current | Type of Current |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| Alternating or Direct Current | Type of Current |
|
|
|
|
|
|
| Earthing Terminal | Grounding Terminal |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| Class II Construction | Denotes Double Insulation |
| min | Minutes | Time | |||||
|
| s | Seconds | Time | ||||
| Diameter | Size of Drill Bits, | ||||||
|
|
|
|
|
|
|
| Grinding Wheels, etc. |
|
|
|
|
|
|
| No load speed | |
.../min | Revolutions per Minute | Revolutions, Surface Speed, | ||||||
|
|
|
|
|
|
|
| Strokes, etc. per Minute |
1,2,3, … | Ring Selector Settings | Speed, Torque or Position Settings | ||||||
8