Kawasaki 691170 instruction manual Functional Description, Component Model Number, Battery

FUNCTIONAL DESCRIPTION

3
5
6		7	8
	12	9	11
4			10
		1	2

CONTROLS AND COMPONENTS:			8. Forward/Reversing and
1.	Battery Pack
2.	Release Buttons on Each Side		Trigger Lock Lever
3.	120V AC Adapter		9. Variable Speed Controlled
4.	Charger		Trigger Switch
			10. Accessory/Bit Holder
5.	LED Charging Indicators
			11. Comfort Rubber Grip
6.	10mm (3/8") Keyless Chuck
7.	24 Adjustable Torque Settings		ACCESSORIES:
	Control Ring
			12. Double Ended Screwdriver Bits (2)
COMPONENT		MODEL NUMBER
BATTERY PACK		691167
120V AC ADAPTER		691169
CHARGER		691168
10mm (3/8") KEYLESS CHUCK		690076

9

BATTERY

Before using battery pack, please read carefully all instruc- tions and cautionary markings on battery pack, battery charger and product using battery.

®	Do not incinerate the battery pack even if it is severely dam-
	aged or is completely worn out. The battery pack can explode.

Do not carry battery packs in aprons, pockets, or tool boxes, product kit boxes, drawers, etc. with loose metal objects. Battery pack terminals could be short circuited causing damage to the battery pack, severe burns or fire.

The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic material by the Environmental Protection Agency. Before disposing of dam- aged or worn out Ni-Cad battery packs, check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs, take them to your local recycling center for proper disposal, or call 1-800-822-8837.

The battery is not fully charged. Before first use, the battery pack requires 8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5 hours for the battery to be fully charged.

Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can have a shortened life.

Never over-discharge a battery by using the tool even after tool performance has decreased. Do not attempt to discharge a tool’s battery by continuing to pull on the tool trigger. When tool performance begins to diminish, stop the tool and recharge the battery for optimal performance.

Charge battery pack at ambient temperatures between 50° F – 104° F.

Store tool and battery pack in locations where temperatures will not exceed 120°F. This is important to prevent serious damage to the battery cells.

The battery pack should always be recharged when the Cordless Drill begins to run slowly.

When battery pack is not in use, keep it away from other metal objects such as paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or fire.