Kawasaki 840271 Drilling Metal, Maintenance and Cleaning, Accessories, Tool Current Rating

DRILLING METAL

•Use an even pressure, hard enough to keep the drill biting, but not so hard that the bit spins in the hole. Spinning the bit will dull it quickly. Soft metals like copper, cast iron, brass or aluminum will take less pressure than harder materials like steel.

•When drilling harder metals, use lubricating oil on the tip of the bit.

MAINTENANCE AND CLEANING

Unplug the drill before performing maintenance or cleaning.

•Never immerse tool in liquid. Never let any liquid inside tool housing.

•Clean with a damp cloth and mild soap. Do not use solvents or harsh detergents.

•Check brushes periodically. Worn brushes should be replaced by qualified serv- ice personnel.

•Keep air vents clean and free from debris. Blocked air vents can lead to over- heating.

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experi- ence a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table below).

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING		CONDUCTOR SIZE IN A.W.G
AMPERE	10FT.	25FT.	50FT.	100FT.
3-6	18	18	18	18
6-8	18	18	18	16
8-10	18	18	18	14
10-12	16	16	14	14
12-16	14	12	12	-
16-20	12	12	12	-

SPECIFICATIONS

SPECIFICATIONS
Voltage	120V	60 Hz
Rated Current	6.6 A
No-Load Speed	0-3000/min
Impact	48000/min
Chuck Capacity (max.)	￿ 13mm (1/2")

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Impact Wrenches

Sanders

Jigsaws

Circular Saws

Angle Grinders

Reciprocating Saws

Routers

Rotary Tools

Corded and Cordless Multi-Purpose Tools

Wide Range of Accessories and more

13 14