Kawasaki 691204 Release the trigger switch turning the saw off, Using the CUT-OFF SAW

Page 11

1.Release the trigger switch turning the saw off.

2.Place a padlock, with a shank diameter of 13/16" (21mm) or less, through the hole in the trigger and close it. This makes the trigger switch inoperable. See Figure 11.

3.Place the key for the padlock in a secure location.

USING THE CUT-OFF SAW

Disconnect the abrasive Cut-off saw from the AC power source eliminating any accidental starting of the motor.

Before using the saw, ensure the wheel has cooled down from any previous actions. Wear approved leather work gloves when handling the various workpieces and to protect the hands from a hot Cut-off wheel.

FOLLOW THE INSTRUCTIONS BELOW TO OPERATE THE ABRASIVE CUT-OFF SAW. SEE FIGURE 12.

1.Adjust the angle of cut. See ADJUSTING THE WORK VISE on pages 15-16.

2.Turn the screw clamp clockwise to securely tighten the workpiece in the vise.

3.Plug the power cord into an approved GROUNDED AC receptacle.

4.Grip the handle and place thumb over the safety button.

5.Press the safety button with thumb. Squeeze the trigger switch. Release the

safety button.

6. Allow the Cut-off saw to spin up to full speed.

7. Slowly pull down on the handle while continuing to squeeze trigger switch. Lower the Cut-off wheel slowly into the workpiece.

FIGURE 12. USING

THE CUT-OFF SAW

8.Ensure the abrasive Cut-off wheel cuts completely through the workpiece. Should the Cut-off wheel fail to pass through the workpiece, raise the handle until it clears. Turn off the Cut-off saw and remove the power cord from the AC receptacle. Refer to SETTING THE CUT-OFF WHEEL DEPTH GAUGE.

9.Once the cut is completed, turn off the Cut-off saw by releasing the trigger switch. This also allows the safety button to return to the “OFF” position. See Figure 8.

10.Unplug the Cut-off saw from the AC power source. Ensure the abrasive wheel has stopped spinning before removing the workpiece.

11.Use a dry, soft bristle, brush or an air hose and clean any debris remaining from the cut.

12.Lock down the Cut-off saw with the swing lock handle. Using a pad lock secure the trigger switch. Store the abrasive Cut-off saw in a dry safe location.

SETTING THE CUT-OFF WHEEL DEPTH GAUGE

The cutting depth of the abrasive Cut-off wheel can be set using the adjustment screw on the wheel housing. See Figure 13.

1. Locate the depth adjustment screw.

2. Adjust the screw counterclockwise to increase the depth of cut. Tighten the jam nut.

3. Loosen the jam nut and turn the screw clockwise to decrease the depth of cut. Tighten the jam nut.

FIGURE 13. SETTING THE

DEPTH GAUGE

For cutting sections of the workpiece completely off, ensure the depth adjustment screw is set allowing the abrasive Cut-off wheel to go beyond the base surface into the groove provided.

LASER GUIDE

Use of controls or procedures, or performance of proce- dures other then those specified herein may result in hazardous radiation exposure.

20

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CUT-OFF SAW Intended USE Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsKeep Guards in Place and in Working Order Important SafeguardsGeneral Safety Rules for ALL Electric Power Tools Save These Instructions for Future ReferenceExtension Cord Usage Grounding InstructionsDo not Perform ANY Operation Freehand Important Safety Rules for CUT-OFF SawsDo not Operate the SAW Without Guards in Place Never Reach around the SAW BladeFunctional Description SymbolsSymbol Name Explanation AssemblyUnlocking the CUT-OFF SAW Tools Required for AssemblyRemoving and Installing the Abrasive Cutting Wheel Tools, pictured, are supplied by the customerDo not Tighten AT this Time Adjusting the Work ViseReplace nut on the movable blade guard Operating Instructions for the CUT-OFF SAW Using the Quick Lock LeverSecuring the Trigger Switch Attaching the Rear Spark ShieldPlace the key for the padlock in a secure location Release the trigger switch turning the saw offUsing the CUT-OFF SAW Setting the CUT-OFF Wheel Depth GaugeOperating the Laser Laser SafetyOperation Accessible Fields Using the Laser LightTroubleshooting Maintenance and CleaningCleaning MaintenanceAmpere Trouble Probable Cause SolutionAccessories SpecificationsCommercial or Rental Purpose Year Limited WarrantyWarranty Performance Other Consumer DO-IT-YOURSELF DIY ToolsLimitation Of Liability Limitations on Warranty DisclaimersExclusions

691204 specifications

The Kawasaki 691204 is a powerful engine designed for a variety of heavy-duty applications, specifically in the domain of outdoor power equipment. This engine exemplifies Kawasaki’s commitment to performance, reliability, and advanced technology, making it a preferred choice for both commercial and residential users.

One of the main features of the Kawasaki 691204 is its impressive horsepower output, which is optimized for tasks requiring significant power such as lawn care, landscaping, and industrial applications. Its robust design allows it to handle even the toughest jobs with efficiency, ensuring that users achieve their desired outcomes without prolonged downtime.

The Kawasaki 691204 incorporates cutting-edge technology, including an overhead valve (OHV) design. This feature not only improves the engine's overall efficiency but also enhances its torque curve, allowing for better performance at various operating speeds. The OHV configuration also contributes to lower emissions, aligning the engine with modern environmental standards and regulations, making it an eco-friendly option without compromising power.

Another significant characteristic of the Kawasaki 691204 is its exceptional durability. Constructed from high-quality materials, this engine is built to withstand demanding conditions and extended use. The engine’s enhanced cooling system ensures optimal operating temperatures, reducing the risk of overheating and prolonging its lifespan. Moreover, the 691204 is designed for easy maintenance, featuring accessible components that streamline servicing tasks, thus enhancing user convenience.

Furthermore, the Kawasaki 691204 is known for its smooth operation. Thanks to the advanced balancing technology integrated into the engine, vibrations are minimized, resulting in a more comfortable user experience. This is particularly important for extended usage, as it reduces fatigue and increases productivity.

In summary, the Kawasaki 691204 is an outstanding engine characterized by its power, efficiency, and durability. Equipped with advanced technologies such as the OHV design and a high-performance cooling system, it meets the demands of both commercial and residential users alike. With its user-friendly maintenance features and smooth operation, the Kawasaki 691204 stands out as a reliable choice for those seeking a high-performance engine to tackle a wide variety of outdoor power equipment tasks.
Top Page Image Contents