Kawasaki 691204 instruction manual Operating the Laser, To Change Laser Batteries, Laser Safety

Page 12
FIGURE 14. CHANGING
LASER BATTERIES

OPERATING THE LASER

Do not stare directly into the Laser beam, aperture or into a reflection from a mirror-like surface.

The laser runs on two AAA batteries which are located beneath the “ON/OFF” switch.

When the laser light begins to dim, change both batter- ies. NEVER mix old batteries with new.

TO CHANGE LASER BATTERIES:

1. Open battery compartment cover.

2. Make sure batteries are correctly positioned according to the positive/negative markings on the compartment.

3. Close cover.

LASER SAFETY

NEVER LOOK INTO THE LASER BEAM. Any contact with the eyes by the beam could cause injury. Do not use the laser when cutting reflective materials.

DO NOT AIM THE LASER BEAM AT ANYONE OR AT REFLECTIVE SURFACES. CLASS 2M LASER PRODUCT. Any contact with the eyes by the beam could cause injury. Ensure the laser beam is turned on only when the tool is on a non- reflective workpiece and as such it is aimed only at the work surface. Metals and other materials like steel which can be highly reflective should only be cut with- out the use of the laser.

STORE OUT OF REACH OF CHILDREN. Equipment should be in a high location or locked up to keep out of reach of children. It is not a toy.

DO NOT TAMPER WITH THE LASER OUTPUT. Changing the performance of the laser to increase its output is prohibited. Any claim for damages or injuries resulting from not following these instructions will be refused.

OPERATION ACCESSIBLE FIELDS:

 

Wavelength

636-660nm

Laser Power for Classification

<1mW CW

FIGURE 15. USING THE LASERLIGHT

USING THE LASER LIGHT:

1.Place the workpiece on the table.

2.Turn the laser switch to the ON position.

3.To adjust the laser line turn the laser adjustment knob in a counter-clockwise direction to loosen it and then move it to the left or right until the laser line is in line with the blade. Turn the laser adjust- ment knob in a clockwise direction to tighten.

NEVER OPERATE LASER IF THE UNIT IS DEFECTIVE OR THE COVER OR SEAL IS DAMAGED.

DO NOT SERVICE LASER. The laser unit must be returned to the factory for any service or repair. Service or repair must be handled by authorized factory trained technicians.

Do not open the laser unit except to change batteries.

REMOVE BATTERIES IF THE LEVEL IS TO BE STORED FOR ANY LENGTH OF TIME. Batteries may leak and damage the laser if it is stored idle for more than 3 months.

Be careful with this tool. Striking or jarring it, especially on the laser housing, can affect its accuracy.

The laser guide does not normally present an optical hazard, although staring at the beam may cause flash blindness.

Other than batteries, there are no user-serviceable parts in the laser device.

It may be more difficult to see the laser line in conditions of bright sunshine and on certain surfaces.

21

LASER LIGHT DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS (MAGNIFIERS) CLASS 2M LASER PRODUCT 635-660nm, <1mW CW CLASSIFIEDS PER IEC 60825-1, Ed. 1.2, 2001-08

AVOID EXPOSURE - LASER LIGHT IS

EMITTED FROM THIS APERTURE.”

LASER RADIATION

CAUTION LABEL

22

Page 11 Page 13
Image 12
Page 11 Page 13
Contents CUT-OFF SAW Table of Contents Recognize Safety SYMBOLS, Words and LabelsCongratulations Intended USEImportant Safeguards General Safety Rules for ALL Electric Power ToolsSave These Instructions for Future Reference Keep Guards in Place and in Working OrderGrounding Instructions Extension Cord UsageImportant Safety Rules for CUT-OFF Saws Do not Perform ANY Operation FreehandNever Reach around the SAW Blade Do not Operate the SAW Without Guards in PlaceSymbols Symbol Name ExplanationAssembly Functional DescriptionTools Required for Assembly Removing and Installing the Abrasive Cutting WheelTools, pictured, are supplied by the customer Unlocking the CUT-OFF SAWAdjusting the Work Vise Replace nut on the movable blade guardDo not Tighten AT this Time Using the Quick Lock Lever Securing the Trigger SwitchAttaching the Rear Spark Shield Operating Instructions for the CUT-OFF SAWRelease the trigger switch turning the saw off Using the CUT-OFF SAWSetting the CUT-OFF Wheel Depth Gauge Place the key for the padlock in a secure locationLaser Safety Operation Accessible FieldsUsing the Laser Light Operating the LaserMaintenance and Cleaning CleaningMaintenance TroubleshootingTrouble Probable Cause Solution AccessoriesSpecifications AmpereYear Limited Warranty Warranty PerformanceOther Consumer DO-IT-YOURSELF DIY Tools Commercial or Rental PurposeLimitations on Warranty Disclaimers ExclusionsLimitation Of Liability

691204 specifications

The Kawasaki 691204 is a powerful engine designed for a variety of heavy-duty applications, specifically in the domain of outdoor power equipment. This engine exemplifies Kawasaki’s commitment to performance, reliability, and advanced technology, making it a preferred choice for both commercial and residential users.

One of the main features of the Kawasaki 691204 is its impressive horsepower output, which is optimized for tasks requiring significant power such as lawn care, landscaping, and industrial applications. Its robust design allows it to handle even the toughest jobs with efficiency, ensuring that users achieve their desired outcomes without prolonged downtime.

The Kawasaki 691204 incorporates cutting-edge technology, including an overhead valve (OHV) design. This feature not only improves the engine's overall efficiency but also enhances its torque curve, allowing for better performance at various operating speeds. The OHV configuration also contributes to lower emissions, aligning the engine with modern environmental standards and regulations, making it an eco-friendly option without compromising power.

Another significant characteristic of the Kawasaki 691204 is its exceptional durability. Constructed from high-quality materials, this engine is built to withstand demanding conditions and extended use. The engine’s enhanced cooling system ensures optimal operating temperatures, reducing the risk of overheating and prolonging its lifespan. Moreover, the 691204 is designed for easy maintenance, featuring accessible components that streamline servicing tasks, thus enhancing user convenience.

Furthermore, the Kawasaki 691204 is known for its smooth operation. Thanks to the advanced balancing technology integrated into the engine, vibrations are minimized, resulting in a more comfortable user experience. This is particularly important for extended usage, as it reduces fatigue and increases productivity.

In summary, the Kawasaki 691204 is an outstanding engine characterized by its power, efficiency, and durability. Equipped with advanced technologies such as the OHV design and a high-performance cooling system, it meets the demands of both commercial and residential users alike. With its user-friendly maintenance features and smooth operation, the Kawasaki 691204 stands out as a reliable choice for those seeking a high-performance engine to tackle a wide variety of outdoor power equipment tasks.
Top Page Image Contents