Specific Safety Rules AND/OR Symbols

Hold tool by insulated gripping surfaces when perform- ing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator.

SAFETY RULES FOR CORDLESS DRILL / DRIVERS

Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust.

Do not grasp the tool or place your hands too close to the spinning chuck or drill bit. Your hand may be lacerated or may cause injury.

Secure the material being worked on. Never hold it in your hand or across your legs. Unstable support can cause loss of control and injury.

Position yourself to avoid being caught between the tool or side handle and walls or posts. Should the socket or bit become bound in the work, the reac- tion torque of the tool could crush your hand or leg.

Check to see that keys and adjusting wrenches are removed from the Cordless Drill before switching the tool “ON”. Keys or wrenches can fly away

at high velocity striking you or a bystander.

When using the Cordless Drill, always maintain a firm grip on the tool with both hands.

Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.

Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.

Do not run the Cordless Drill while carrying it at your side. A spinning sock- et or bit could become entangled with clothing and injury may result.

Disconnect the plug or remove the battery pack from tool and place the switch in the locked or “OFF” position before making any assembly adjustments, changing accessories, performing any inspection, maintenance or cleaning procedures. Such preventive safety measures reduce the risk of starting the tool accidentally.

Do not use the Cordless Drill if it has been damaged, left outdoors in the rain, snow, wet or damp environments, or immersed in liquid.

Maintain labels and nameplates on the Cordless Drill. These carry important information. If unreadable or missing, contact Alltrade for a replacement.

SYMBOLS

IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL			NAME	EXPLANATION
		V	Volts	Voltage (Potential)
		A	Amperes	Current
	Hz		Hertz	Frequency (Cycles per Second)
	W		Watt	Power
	Kg		Kilograms	Weight
			Alternating Current	Type of Current
			Direct Current	Type of Current
			Direct Current	Type of Current
			Alternating or Direct Current	Type of Current
			Earthing Terminal	Grounding Terminal
			Earthing Terminal	Grounding Terminal
			Class II Construction	Denotes Double Insulation
	min		Minutes	Time
		s	Seconds	Time
			Diameter	Size of Drill Bits,
				Grinding Wheels, etc.
			No load speed	No-load Rotational Speed
.../min			Revolutions per Minute	Revolutions, Surface Speed,
				Strokes, etc. per Minute
1,2,3, …			Ring Selector Settings	Speed, Torque or Position Settings

840595 specifications

The Kawasaki 840595 is a sophisticated piece of machinery that stands out in the competitive landscape of industrial applications. Known for its robust performance and innovative features, this model is designed to deliver exceptional results across a variety of tasks, making it a valuable asset for professionals in different sectors.

One of the standout features of the Kawasaki 840595 is its powerful engine, which provides superior efficiency and reliability. The innovative design of the engine ensures that it meets rigorous emission standards while delivering impressive horsepower. This balance of power and environmental responsibility is a hallmark of Kawasaki’s commitment to sustainability in its manufacturing processes.

The 840595 is equipped with advanced technological features that enhance usability and performance. One such feature is its sophisticated control system, which allows operators to monitor performance metrics in real-time. This dashboard provides vital information, enabling users to make data-driven decisions for optimal operation. The integration of this technology ensures that potential issues can be identified and addressed swiftly, minimizing downtime and maintaining productivity.

Another key characteristic of the Kawasaki 840595 is its versatility. Its design facilitates a range of attachments and implements, allowing it to seamlessly transition between different tasks. Whether it is used for construction, agriculture, or industrial applications, the model can be tailored to meet specific operational needs. This adaptability makes it a favorite among operators who require a multi-purpose machine.

Additionally, safety features are paramount in the design of the Kawasaki 840595. It is equipped with state-of-the-art safety mechanisms that protect not only the operator but also the surrounding environment. The machine incorporates systems that prevent accidental start-ups and features that improve visibility during operation, ensuring a safer working environment.

Overall, the Kawasaki 840595 is a remarkable machine that combines power, efficiency, and advanced technology into a single package. Its robust performance, versatile functionality, and emphasis on safety make it a standout choice for those in need of reliable industrial equipment. As industries continue to evolve and face new challenges, the Kawasaki 840595 is well-positioned to meet the demands of modern-day operations, making it an invaluable asset in any field.