Kawasaki 840595 Variable Speed Trigger Switch Torque Settings, High / LOW Speed Gear Shifting

Page 9

VARIABLE SPEED TRIGGER SWITCH

TORQUE SETTINGS

THIS TOOL IS CONTROLLED

BY A TRIGGER SWITCH:

•The speed of the Cordless Drill depends on the amount of pressure you put on the trigger.

•The more pressure you apply, the faster the Cordless Drill will go.

•Release the pressure and the Cordless Drill will slow down.

TRIGGER SWITCH

LED LIGHT

To prevent damaging the tool or driving screw too deep into work piece, release the trigger when you feel the clutch slip.

THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE:

CONTROL RING

• For light duty work, use lower settings.

• For heavy duty work, use higher settings.

PROPER SETTING FOR DRIVING SCREWS:

1. Set the ring on the lowest

BUILT IN LED LAMP

• Press the trigger switch to light up the lamp. The lamp remains on while the trigger

switch is being pressed. The lamp goes out after releasing the trigger.

NOTE: Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch the lens of lamp, or it may lower the illumination.

Do not look into light or see the source of light directly.

FORWARD / REVERSE AND TRIGGER LOCK LEVER

Be sure the trigger is released when changing the position of the lever. Always store the tool in the “LOCKED/OFF” position.

Always check the direction of the Cordless Drill's rotation before use.

setting to begin.

2.Try tightening the first screw. If the drill drives smoothly, proceed with the next screw.

3. If the Drill’s clutch slips, increase the torque setting

and try again until the Drill drives the screw without incident.

HIGH / LOW SPEED (GEAR) SHIFTING

 

FOR LOW SPEED SETTING:

LOW SPEED

HIGH SPEED

• Slide the switch on top of

the Drill to Position 1 for

 

 

high torque applications and

 

 

driving screws.

 

 

FOR HIGH SPEED SETTING:

TO SELECT THE DIRECTIONS OF ROTATION:

•To select forward Cordless Drill rotation, press the trigger lock from left to right flat against the Cordless Drill body.

 

FORWARD

 

LOCK

TRIGGER

REVERSE

LOCK

 

•Slide the switch to Position 2 for light duty projects.

•To select reverse, press the trigger lock lever in the opposite direction.

•The center position locks the tool.

15

16

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 19.2V 2-SPEED BATTERY-OPERATED Drill General Safety Rules for ALL Battery Operated Tools Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsImportant Safeguards Electrical SafetyWork Area Personal Safety ServiceTool USE and Care Safety Rules for Cordless Drill / Drivers Specific Safety Rules AND/OR SymbolsSymbols Symbol Name ExplanationBattery AccessoriesFunctional Description Controls and ComponentsAttach Battery Pack Remove Battery PackCharge Battery Pack Important Information for Recharging HOT BatteriesOperating the Drill AssemblyVariable Speed Trigger Switch Torque Settings Forward / Reverse and Trigger Lock LeverHigh / LOW Speed Gear Shifting Screwdriving Maintenance and CleaningDrilling Metal Drilling MasonrySpecifications AccessoriesConductor Size in A.W.G Protecting the EnvironmentWhich Extend Beyond the Description on the Face Hereof Year Limited Home USE WarrantyWarranty Disclaimers

840595 specifications

The Kawasaki 840595 is a sophisticated piece of machinery that stands out in the competitive landscape of industrial applications. Known for its robust performance and innovative features, this model is designed to deliver exceptional results across a variety of tasks, making it a valuable asset for professionals in different sectors.

One of the standout features of the Kawasaki 840595 is its powerful engine, which provides superior efficiency and reliability. The innovative design of the engine ensures that it meets rigorous emission standards while delivering impressive horsepower. This balance of power and environmental responsibility is a hallmark of Kawasaki’s commitment to sustainability in its manufacturing processes.

The 840595 is equipped with advanced technological features that enhance usability and performance. One such feature is its sophisticated control system, which allows operators to monitor performance metrics in real-time. This dashboard provides vital information, enabling users to make data-driven decisions for optimal operation. The integration of this technology ensures that potential issues can be identified and addressed swiftly, minimizing downtime and maintaining productivity.

Another key characteristic of the Kawasaki 840595 is its versatility. Its design facilitates a range of attachments and implements, allowing it to seamlessly transition between different tasks. Whether it is used for construction, agriculture, or industrial applications, the model can be tailored to meet specific operational needs. This adaptability makes it a favorite among operators who require a multi-purpose machine.

Additionally, safety features are paramount in the design of the Kawasaki 840595. It is equipped with state-of-the-art safety mechanisms that protect not only the operator but also the surrounding environment. The machine incorporates systems that prevent accidental start-ups and features that improve visibility during operation, ensuring a safer working environment.

Overall, the Kawasaki 840595 is a remarkable machine that combines power, efficiency, and advanced technology into a single package. Its robust performance, versatile functionality, and emphasis on safety make it a standout choice for those in need of reliable industrial equipment. As industries continue to evolve and face new challenges, the Kawasaki 840595 is well-positioned to meet the demands of modern-day operations, making it an invaluable asset in any field.
Top Page Image Contents