Kawasaki 840055 instruction manual Ampere, Voltage

Page 43

MAINTENANCE AND CLEANING

Always remove the battery pack before attempting cleaning or maintenance.

This Circular Saw is lubricated before it leaves the factory. This lubrication should last for the life of the tool. No further lubrication is required.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the casing. Never immerse any part of the tool in a liquid. Always keep the ventilation openings clear.

Always clean the battery pack using only a dry cloth. Do not use liquids.

Always unplug the charger before cleaning it.

Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth.

Inspect all mounting screws regularly. Tighten any loose screws. Failure to keep the mounting screws tight could result in serious injuries.

Never open the Cordless Circular Saw case, battery pack or charger. Do not attempt to repair the Cordless Circular Saw, battery pack or charger yourself. Opening any of these parts will void your warranty.

ACCESSORIES

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry the amount of current necessary for your power tool. If not, your tool may experi- ence a loss of power, excessive voltage drop or overheating. The smaller the gauge number, the heavier the cord (see table on next page).

19

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING

 

 

CONDUCTOR SIZE IN A.W.G

 

AMPERE

10FT.

 

25FT.

50FT.

100FT.

3-6

18

 

18

18

18

6-8

18

 

18

18

16

8-10

18

 

18

18

14

10-12

16

 

16

14

14

12-16

14

 

12

12

-

16-20

12

 

12

12

-

 

 

 

 

 

 

 

SPECIFICATIONS

 

 

 

 

 

 

 

 

SPECIFICATIONS

 

 

 

 

Voltage

19.2V

 

 

 

 

 

 

 

 

 

 

Switch

On/Off Switch

 

 

Charger Input

120V

 

60Hz

 

 

Charging Time

Approx. 3-5 hours

 

 

No Load Speed (RPM)

3700/Min.

 

 

Blade Diameter

￿ 140mm (5-1/2")

 

 

Battery Type

Ni-Cad

 

 

 

 

PROTECTING THE ENVIRONMENT

BATTERIES

Alltrade batteries can be recharged many times. At the end of their useful life, recycle batteries with due care for our environment.

Ni-Cad and Ni-MH batteries are recyclable. Take them to your local recycling center or call 1-800-822-8837. Collected batteries will be recycled or disposed of properly.

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would like further information on the following products, please contact Alltrade Customer Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Angle Grinders

Impact Wrenches

Reciprocating Saws

Sanders

Routers

Jigsaws

Rotary Tools

Circular Saws

Corded and Cordless Multi-Purpose Tools

 

Wide Range of Accessories and more

Image 43
Contents 19.2V 2-SPEED BATTERY-OPERATED Drill Congratulations Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsWork Area Electrical SafetyService Personal SafetyTool USE and Care Symbol Name Explanation Specific Safety Rules AND/OR SymbolsSafety Rules for Cordless Drill / Drivers SymbolsAccessories Functional Description BatteryComponent Model Number Charger Charging Battery Pack REMOVING/ATTACHING Battery PackAssembly Operating the Drill This Tool is Controlled By a Trigger SwitchBuilt in LED Lamp Forward / Reverse and Trigger Lock LeverDrilling Masonry High / LOW Speed Gear Shifting Torque SettingsScrewdriving Drilling MetalConductor Size in A.W.G Maintenance and CleaningAccessories ScrewdrivingOther Consumer DO-IT-YOURSELF DIY Tools SpecificationsYear Limited Home USE Warranty Protecting the EnvironmentExclusions 19.2V BATTERY-OPERATED Jigsaw Congratulations Table of ContentsGeneral Safety Rules for ALL Battery Operated Tools Recognize Safety SYMBOLS, Words and LabelsElectrical Safety Important SafeguardsWork Area Safety Rules for Cordless Jigsaws Personal SafetyService Specific Safety Rules AND/OR SymbolsCould become entangled with clothing and injury may result SymbolsSymbol Name Explanation Ring Selector SettingsComponent Model Number Functional Description BatteryCharger Removing / Attaching Battery PackCharging Battery Pack AssemblyOperating the Jigsaw Operating the on / OFF Switch General CuttingPlunge Cutting Metal Cutting Maintenance and CleaningAccessories SpecificationsOther Consumer DO-IT-YOURSELF DIY Tools Year Limited Home USE WarrantyWarranty Disclaimers 87-1904-60957 Intended USE Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsService Battery Tool USE and CareSafety Rules for Worklight Component Model Number SymbolsSymbol Name Explanation Functional DescriptionAttach Battery Pack BatteryRemoving / Attaching Battery Pack Remove Battery PackOperating the Worklight Charging Battery Pack Adjusting the Worklight BeamCharge Battery Pack Operating the on / OFF SwitchTool Current Rating AccessoriesMaintenance and Cleaning SpecificationsWarranty Performance Year Limited Home USE WarrantyOther Consumer DO-IT-YOURSELF DIY Tools Limitation Of Liability Component #840055 General Safety Rules for ALL Battery Operated Tools Work Area Electrical SafetySpecific Safety Rules AND/OR Symbols Personal SafetyTool USE and Care Causes and Prevention of Kickback Safety Rules for Circular SAWSAW Blades ComponentRIP Fence Lock Knob Control FeaturesDepth RIP FenceAssembly Removing / Attaching Battery Pack Charging Battery PackPull battery pack free Cordless Circular Saw Red LED indicator light will remain onAttaching / Removing Blade Adjusting Depth and AnglePocket Cutting Operating the Trigger SwitchOperating the Circular SAW General CuttingVoltage AmpereYear Limited Home USE Warranty Warranty Disclaimers