Maintenance

WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.

Light Bulb Replacement

Allow at least five (5) minutes for light bulbs to cool off before touching bulbs to avoid accidental burning of skin.

Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears.

There are three (3) bulbs under the Log Set Assembly, which generate the flames and embers, and one (1) bulb above that illuminate the log exterior.

Tool Requirements: Phillips screw driver

Helpful Hints: It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.

Upper Bulb Requirement: Quantity of one (1) 7 Watt candelabra E12 small base 120 Volt.

Do not exceed 7 Watts per bulb.

Upper Bulb Replacement (Figure 5)

1.Open door by pulling the handle.

2.Locate the upper bulb bracket.

3.Bend light retainer bracket down.

4.Locate and remove light bulb.

5.Insert and install new bulb.

6.Bend light retainer bracket back into its original position.

7.Close the door.

Figure 5

Lower Bulbs Requirement: Quantity of three (3) 35 Watt Halogen Quartz lamps, 120 Volt, G9 Base.

Do not exceed 35 Watts per bulb.

Lower Bulb Replacement

1.Remove the stove pipe kit (if equipped).

2.Gently place stove on its back on a flat surface.

3.Remove the heater cover retaining screws located on the bottom of the stove (Figure 6) and lower heater and light assembly out onto the floor.

4.Remove the burnt out bulb(s) by pulling straight out of socket. If bulbs are difficult to remove form socket move the bulb from side to side while pulling being careful not to damage the light socket.

5.Replace the lower light bulbs.

6.Reassemble in the reverse order as above.

Glass Cleaning

The clear door is cleaned in the factory during the assembly operation. During shipment, installation, handling, etc., the clear door may collect dust particles. These can be removed by dusting lightly with a clean, dry cloth.

To remove fingerprints or other marks, the clear doors can be cleaned with a damp cloth. The clear door should be completely dried with a lint free cloth to prevent water spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the clear door surface.

Plastic Door Cleaning

Stove Surface Cleaning

Use warm water only to clean painted surfaces of the Stove. Do not use abrasive cleaners.

Servicing

Except for light bulb replacement and cleaning described above, an authorized service representative should perform any other servicing.

Figure 6

Screws

DS7425DLX, DS7420 specifications

The Dimplex DS7425DLX and DS7420 are innovative electric fireplaces that bring warmth and style to any space. Both models exemplify Dimplex's commitment to quality, energy efficiency, and modern design.

The Dimplex DS7425DLX features a sleek and contemporary design with a powerful 750W to 1500W heating capacity, allowing it to effectively warm rooms of various sizes. Its realistic flame effect utilizes Dimplex’s patented OptiMyst technology, which creates shimmering flames and smoke that closely mimic a traditional wood-burning fireplace. This technology not only adds visual appeal but also enhances the overall ambiance of a room.

On the other hand, the DS7420 model offers similar heating capabilities and aesthetic features, but with a more classic design approach. It incorporates the same OptiMyst technology, generating a lifelike flame and smoke effect that captivates viewers. The DS7420 is especially well-suited for traditional or rustic interiors, making it a versatile choice for varied decor styles.

Both models are equipped with advanced safety features, including an automatic shut-off system that engages if overheating occurs. This ensures peace of mind for users, especially in households with children or pets. The thermostatic control feature allows users to set their desired temperature, further enhancing the comfort level while optimizing energy consumption.

Another notable characteristic of the Dimplex DS7425DLX and DS7420 is their ease of installation. They do not require any venting or gas lines, making them an ideal choice for apartments, condos, or homes where traditional fireplaces may not be an option. Their plug-and-play design means users can simply plug them in and enjoy immediate warmth.

Both models are designed to operate quietly, allowing users to enjoy their ambiance without disruptive noise. This quality makes them perfect for bedrooms, living rooms, or any space where tranquility is valued.

In summary, the Dimplex DS7425DLX and DS7420 electric fireplaces stand out in the market for their combination of aesthetic appeal, advanced heating technology, and user-friendly features. Whether you prefer the modern flair of the DS7425DLX or the classic charm of the DS7420, both models offer effective heating solutions that enhance the overall atmosphere of any room while ensuring safety and comfort.