Three Position On/Off Switch | Dimplex DS7425DLX, DS7420 specs

OPERATION

To access the controls, go to the back of the stove (Figure 1).

Figure 1
A	B	C
		D

A. Three Position On/Off Switch

The switch has two On positions marked with “I” and “II”. The “I” position is for manual operation. In this position the built-in remote control is bypassed.

The “II” position is for operating the unit with the provided remote control. When in “II” position the unit is operated with the ON and OFF buttons of the remote control.

When the switch is in the center position “O” the unit is off.

B. Light On/Off Switch

The Light On/Off Switch supplies power to the upper light of the log bed display area.

C. Heater On/Off Switch

The Heater On/Off Switch supplies power to the heater.

D. Heater Thermostat Control

To adjust the temperature to your individual requirements, turn the thermostat control clockwise all the way to

turn on the heater. When the room reaches the desired temperature, turn the thermostat knob counter clockwise until you hear a click. Leave in this position to maintain the room temperature at this setting. For additional heat, turn clockwise until you hear the click again and the heater will turn on.

Resetting the Temperature Cutoff Switch

Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the Three Position Switch to Off “O” and waiting five (5) minutes before switching the unit back on.

CAUTION: If you need to continuously reset the heater, unplug the unit and call Customer Service at 1-888-346-7539.

Remote Control

The stove is supplied with an integrated On/Off remote control.

!NOTE: Ensure that the stove’s Three Position Switch is set to the remote Control setting (“II” position).

To operate, push the ON button to turn stove on, push the OFF button to turn the stove off.

Remote Initialization

Follow these steps for remote control initialization and if required, re-initialization:

1.Disconnect power to stove.

2.Set the Three Position On/Off Switch to the Remote position (Figure 1A).

3.Wait a minimum of five (5) seconds and then re-acquire power to stove.

4.Within 10 seconds of re-acquiring power, press the ON button located on the remote control transmitter.

!NOTE: You will have only 10 seconds to perform this last step. Failure to do so will result in these steps needing to be followed again.

Battery Installation

To install or replace the battery:

1.Slide battery cover open on the hand held transmitter (Figure 2).

2.Correctly install one (1) 12 Volt (A23) battery in the battery holder.

3.Close the battery cover.

Battery must be recycled or disposed ofproperly. Check with your Local Authority or Retailer for recycling advice in your area.

Figure 2

Button

Off Button

Plastic

Strip

Battery

Cover

DS7425DLX, DS7420 specifications

The Dimplex DS7425DLX and DS7420 are innovative electric fireplaces that bring warmth and style to any space. Both models exemplify Dimplex's commitment to quality, energy efficiency, and modern design.

The Dimplex DS7425DLX features a sleek and contemporary design with a powerful 750W to 1500W heating capacity, allowing it to effectively warm rooms of various sizes. Its realistic flame effect utilizes Dimplex’s patented OptiMyst technology, which creates shimmering flames and smoke that closely mimic a traditional wood-burning fireplace. This technology not only adds visual appeal but also enhances the overall ambiance of a room.

On the other hand, the DS7420 model offers similar heating capabilities and aesthetic features, but with a more classic design approach. It incorporates the same OptiMyst technology, generating a lifelike flame and smoke effect that captivates viewers. The DS7420 is especially well-suited for traditional or rustic interiors, making it a versatile choice for varied decor styles.

Both models are equipped with advanced safety features, including an automatic shut-off system that engages if overheating occurs. This ensures peace of mind for users, especially in households with children or pets. The thermostatic control feature allows users to set their desired temperature, further enhancing the comfort level while optimizing energy consumption.

Another notable characteristic of the Dimplex DS7425DLX and DS7420 is their ease of installation. They do not require any venting or gas lines, making them an ideal choice for apartments, condos, or homes where traditional fireplaces may not be an option. Their plug-and-play design means users can simply plug them in and enjoy immediate warmth.

Both models are designed to operate quietly, allowing users to enjoy their ambiance without disruptive noise. This quality makes them perfect for bedrooms, living rooms, or any space where tranquility is valued.

In summary, the Dimplex DS7425DLX and DS7420 electric fireplaces stand out in the market for their combination of aesthetic appeal, advanced heating technology, and user-friendly features. Whether you prefer the modern flair of the DS7425DLX or the classic charm of the DS7420, both models offer effective heating solutions that enhance the overall atmosphere of any room while ensuring safety and comfort.