Batteries
1.The remote control uses 3 AAA size batteries (included). Replace these batteries at least every 6 months or when the low battery appears on the remote display screen.
2.When batteries are removed wait at least 1 minute before replacing with new batteries.
Code selection
If the current remote control is interfering with the operation of other remote control devices (TV, VCR, garage doors etc.) The code can be changed on the remote.
To change code:
1.Remove the battery cover on the back of the remote control.
2.Slide the four small switches to any configuration other than the factory set code.
3.Remove the batteries, wait for one minute.
4.Install the batteries.
5.Install the battery cover onto the remote.
6.Reinitialize the remote.
7