WARNING: Do not attempt to charge any mobile device that requires more than 1000mA of power. This could cause TekCharge MP1580 to overheat.
Charging a Device Using an Adapter
1.Select the adapter that fits securely into the power jack on your portable device and plug it into the input/output cord.
2.Insert the USB plug on the input/output cord into the USB port on the end of TekCharge.
3.Connect the adapter plug into the power jack on your portable device.
4.Slide the TekCharge power switch to the ON position to provide power through the USB port.
5.Turn on the portable device and use it as you would normally. While connected, TekCharge will power and/or charge your device.
Charging a device using an adapter.
or
Leave the portable device turned off and TekCharge will charge the device battery.
6.When finished, slide the power switch to OFF and unplug the power output cord from TekCharge and your device.
NOTE: If neither of the included adapters fits snugly into your portable device power jack, please go to our web site at www.tekkeon.com/tcadapters to determine which adapter plug you need for your device. You can obtain most adapters through the web site, or by contacting Tekkeon by phone at:
USER GUIDE | 5 |