3.Plug the USB plug on the opposite end of the input/output cord into a USB port on a computer or a USB power adapter (such as Tekkeon’s myCharger, MP1650). The charging lamp will light as follows to indicate the battery status:
Red On | Batteries are charging |
Green On | Batteries are fully charged |
Red Flashing | Batteries are not usable, or are not rechargeable |
Green Flashing | No battery is installed, or batteries are installed incorrectly |
If the lamp is flashing, ensure that the batteries are installed correctly, or replace the batteries with good, rechargeable batteries.
4.When the charging lamp turns green (in approximately 3 hours for two batteries or 6 hours for four batteries), the batteries are fully charged. Unplug the input/output cord from both TekCharge MP1580 and the computer or charger.
NOTE: The charging lamp will function only when TekCharge is connected to external power via the mini USB port. In this case, the capacity indicators on the front of TekCharge MP1580 will be turned off.
It is strongly recommended to recharge the batteries only when completely empty.
Charging Lamp
USER GUIDE | 7 |