OPERATOR’S Manual

MODEL NO. 1002 1.5 AMP 12 VOLT AUTOMATIC BATTERY CHARGER

Your new battery charger has been designed and manufactured to provide years of reliable service. This charger cannot be used on positive ground systems without conversion (see MOUNTING CHARGER FOR CONTINUOUS USE). Proper use and care can prolong the life of the charger. This Operator’s Manual contains information regarding safety, operation, maintenance and storage of your new battery charger. Make sure that you, and anyone else who will be using this charger, are familiar with this information.

PERSONAL PRECAUTIONS

1.Someone should be within range of your voice, or close enough to come to your aid, when you work near a lead-acid battery.

2.Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing or eyes.

3.Wear complete eye protection and clothing protection. Avoid touching eyes while working near battery.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety and operating instructions.

•Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock or injury to persons.

•To reduce the risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

•Use of an improper extension cord could result in a risk of fire and electric shock. If an extension cord must be used, make sure:

1.that pins on plug of extension cord are the same number, size, and shape as those of plug on charger;

2.that extension cord is properly wired and in good electrical condition;

3.that wire size is large enough for ac ampere rating of this charger as indicated in the following table.

RECOMMENDED MINIMUM AWG WIRE SIZE FOR

EXTENSION CORDS FOR THIS BATTERY CHARGER

Length of Cord, Feet	25	50	100	150
AWG Size of Cord	18	18	18	16

•Do not operate charger with damaged ac line cord or plug – replace them immediately.

•Do not operate charger if it has received a sharp blow, been dropped or otherwise damaged in any way; take it to a qualified service person.

•Do not disassemble charger; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.

•To reduce risk of electric shock, unplug charger from outlet before attempting any maintenance or cleaning.

For this reason, it is critical that each time before using your charger, you read this manual and follow the instructions exactly.

To reduce the risk of battery explosion, follow these instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of battery. Review cautionary markings on these products and on engine.

CAUTION – Connect or disconnect the battery clamps only when the ac line cord is disconnected or arcing or burning may result.

CAUTION – Do not expose to rain; replace defective cords or wires immediately.

4.If battery acid contacts skin or clothing, wash immediately with soap and water. If acid enters eye, immediately flood with running cold water for at least 10 minutes and get medical attention immediately.

5.Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit the battery or other electrical part that may cause an explosion.

6.Remove personal metal items such as rings, bracelets, necklaces and watches when working near a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like to metal, causing a severe burn.

7.Use this charger for charging LEAD-ACID batteries only. It is not intended to supply power to a low voltage electrical system other than in an automotive application. Do not use battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.

8.NEVER charge a frozen battery.

9.If it becomes necessary to remove the battery from the vehicle to charge, always remove grounded terminal from battery first. Make sure all accessories in the vehicle are off, so as not to cause an arc.

10.Be sure area around battery is well ventilated while battery is being charged. Gases can be forcefully blown away, by using a piece of cardboard or other non-metallic material, such as a fan.

11.Add distilled water in each cell until battery acid reaches level specified by battery manufacturer. This helps purge excessive gas from cells. Do not overfill. For a battery without cell caps, carefully follow manufacturer’s recharging instructions.

12.Study all battery manufacturer’s specific precautions such as removing or not removing cell caps while charging and recommended rates of charge.

MOUNTING CHARGER FOR CONTINUOUS USE

WARNING – Never alter ac line cord or plug provided. If it will not fit in the outlet, have the proper outlet installed by a qualified electrician. Improper connection can result in the risk of electric shock.

1.Fasten the supplied mounting bracket to the charger with the provided hardware as illustrated in Figure 1.

2.Slide the bottom flange of the mounting bracket under the battery. The battery weight will hold the charger in place.

1002 specifications

The T-Tech 1002 represents a significant innovation in portable technology, designed to meet the demands of both professionals and tech enthusiasts alike. With its sleek design and powerful capabilities, this device stands out in a competitive market.

One of the main features of the T-Tech 1002 is its robust display. Featuring a high-resolution touchscreen that offers vibrant colors and sharp images, the screen size is optimal for a variety of tasks, from watching videos to detailed design work. The display is also engineered to be highly responsive, ensuring smooth navigation and interaction.

Under the hood, the T-Tech 1002 is powered by a state-of-the-art processor that delivers exceptional performance. This processor allows for seamless multitasking, enabling users to run multiple applications simultaneously without any lag. Coupled with sufficient RAM, the device ensures that demanding applications can be executed with ease, making it ideal for professionals in creative fields.

In terms of storage, the T-Tech 1002 offers ample space with various configurations available, including SSD options that provide fast read and write speeds. This feature not only enhances performance but also contributes to the overall portability, making it a perfect companion for on-the-go users.

Connectivity is another strong suit of the T-Tech 1002. It is equipped with a range of ports, including USB-C, HDMI, and traditional USB ports, allowing for easy connection to peripherals and external displays. High-speed Wi-Fi and Bluetooth capabilities are also incorporated, ensuring reliable internet access and seamless connections with other devices.

The T-Tech 1002 is designed with user comfort in mind. Its ergonomic keyboard and touchpad provide a comfortable typing experience, even during prolonged use. The lightweight design further adds to its portability, making it easy to carry around whether for business meetings, travel, or daily commutes.

Battery life is a crucial aspect of any portable device, and the T-Tech 1002 does not disappoint. With an efficient battery system, users can expect all-day performance on a single charge, allowing them to work or enjoy entertainment without the constant worry of finding a power outlet.

Security features are also a top priority in the T-Tech 1002. With advanced encryption and biometric authentication options, users can feel secure in their data and privacy while using the device.

In summary, the T-Tech 1002 showcases a blend of performance, design, and functionality that caters to a wide range of users. Whether for work, entertainment, or creative pursuits, this device is poised to deliver an exceptional experience.