Installation
Color Selection (select models)
Select models can be configured to match black or gray equipment. Switch the gray front panel on the unit for the black front panel if included. If you wish to install an alternate color bezel not included with your unit, call Customer Support at (773)
Single Unit Installation
1Connect the shelves to the shelf extensions A using the included hardware B . Leave the screws slightly loose so that the shelves can be adjusted in the next step.
B |
A |
1 |
2
3
4
Adjust each shelf to fit your rack, then mount them in the lowest available space of your rack
with the hardware provided C . Note that the support ledges should face inward. Tighten the screws that connect the shelf segments B .
Attach mounting ears D to the front mounting holes of your equipment E using the screws provided F . The ears should face forward.
Using an assistant if necessary, lift your equipment and slide it onto the mounting shelves. Attach your equipment to the rack by
passing
C |
B |
2 |
| E |
|
3 | D | F |
| ||
|
|
G |
4 |
3