SpectraLink PTC400 manual Power Supply, Using the Link Dual Charger, Operation, Indicator Lights

Page 1

Link Dual Charger

The Link Dual Charger is a two-slot desktop charger designed to charge the model PTS360 Battery Packs. The handset is placed in the front compartment and a single spare Battery Pack may be placed in the rear slot. Either slot can be chosen to take priority (the first Battery Pack placed into either slot is charged first) so that the handset is always ready for use. Full charging is accom- plished in approximately two hours for each Battery Pack. The Link Dual Charger will only charge Nickel Metal Hydride (NiMH) Battery Packs; this charger will not charge Nickel-Cadmium (NiCd) Battery Packs.

Power Supply

Four different models of the power supply for the Link Dual Charger are available for regional power requirements. The cor- rect power supply must be ordered separately when the charger is ordered. If any questions arise, please contact your service representative.

Set up the Link Dual Charger by placing it on a flat, horizontal surface in order to ensure proper contact with the Battery Pack contacts. Connect the power supply to the charger and plug the power supply into an appropriate wall outlet. The LEDs will light only when a handset or Battery Pack is inserted into the slots.

Using the Link Dual Charger

The user must end any call in progress by pressing the END key on the handset before placing the handset into the charger. The call will not automatically terminate when the handset is placed in the charger. The Battery Pack and handset will only fit into the charger compartments one way. The handset should be inserted into the front slot, facing forward. The Battery Pack alone should

NOTE:

•Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to freezing temperatures or direct sunlight.

•The Link Dual Charger is only authorized for use in the U.S. and Canada.

•Only use the original SpectraLink plug-in power supply.

•Only use SpectraLink Battery Packs in this charger.

•It is normal for the Battery Pack to become warm when charging.

•Never use non-SpectraLink charging units as they could damage the Battery Pack.

•Do not immerse the Link Dual Charger in water or other liquid. Do not pour liquids into the charging slots.

•Do not dip the Battery Pack in water or throw into fire.

•Recycle or dispose of Battery Packs according to local requirements.

•Replacement Battery Packs are available from your supplier or servic- ing agent.

be inserted into the rear slot with the side that attaches to the hand- set facing to the rear. See the cover photo for the correct orientation. Correct placement has been achieved when the charging light is acti- vated. Incorrect placement will not activate the charging light.

Operation

The Link Dual Charger is designed to charge one Battery Pack at a time. Each charging slot has a red light that indicates its current mode. The charging lights have the following characteristics: When both a Battery Pack and a handset are present at the same time, the first one placed into the charger will begin charging. When it is fully charged, the second Battery Pack will charge. When the LED indicator light turns off, the charger is finished charging the Battery Pack in its slot, indicating that the Battery Pack is ready for use. The Link Dual Charger will recharge a single NiMH Battery Pack or a single handset in two hours.

Removal and Replacement

To remove the Battery Pack from the handset, slide the Battery Pack down and off while pressing the Battery Pack release button on the back of the handset. To replace the Battery Pack, align the top of the Battery Pack with the arrows on the label on the back of the handset. Gently press and slide the pack toward the top of the handset until it snaps in place. You should not have to force it against the handset.

Cleaning the Link Dual Charger

The Link Dual Charger may occasionally need to be cleaned to maintain appearance and ensure battery contact. Wipe the surface with a clean, water-dampened cloth or paper towel to remove most films or residues. If the soiling is too stubborn for plain water, a mild detergent solu- tion may be used. Be sure to wipe away any detergent residue with a plain water dampened cloth. DO NOT IMMERSE THE LINK DUAL CHARGER IN WATER OR OTHER LIQUID. The battery contacts may be cleaned with isopropyl (rubbing) alcohol applied with a cotton swab, cloth or paper towel. Do not push or pull the exposed battery contacts. DO NOT POUR LIQUIDS INTO THE SLOTS.

Indicator Lights

Indication Light

Charging Characteristic

Solid On

Charging.

Solid Dim

Waiting to charge. Battery Pack in other slot

 

is charging.

Off

Done charging, empty slot or unit is not powered.

Flash

Error. Battery Pack not charging. Try again or

 

replace Battery Pack.

The Link Dual Charger will only successfully charge NiMH Battery Packs with a YELLOW label on the handset contact side. Older Battery Packs with a GREEN label will not charge in the Link Dual Charger. If the indicator light is flashing with a Battery Pack or handset in the slot, check to make sure the Battery Pack has a YELLOW label.

Link Dual Charger PTC400

For the Link Wireless Telephone

Link Dual Charger

©2005 SpectraLink Corporation P/N 72-0079-00 Rev. C Model # PTC400

SpectraLink Corporation 5755 Central Avenue Boulder, CO 80301 303.440.5330 or 800.676.5465 www.spectralink.com

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Using the Link Dual Charger Power SupplyRemoval and Replacement Cleaning the Link Dual ChargerBloc d’alimentation Retrait et remplacementUtilisation du Link Dual Charger Fonctionnement

PTC400 specifications

The SpectraLink PTC400 is a robust and innovative mobile communication device designed specifically for enterprise environments. Tailored for industries such as healthcare, manufacturing, retail, and hospitality, the PTC400 enhances the communication capabilities of employees by providing them with a reliable, feature-rich handset.

One of the standout features of the PTC400 is its support for a wide range of wireless communication technologies, including Wi-Fi and DECT. This versatility enables seamless integration into existing network infrastructures, allowing organizations to maintain uninterrupted connectivity. The device is compatible with various Voice over IP (VoIP) solutions, facilitating high-quality voice communication and ensuring that employees stay connected even in challenging environments.

The PTC400 is engineered with a focus on durability and usability. It boasts an ergonomic design that ensures comfort during extended use, which is particularly important in demanding settings such as hospitals or manufacturing plants. The device features a high-resolution color display that provides clear visibility of important information, even in bright or low-light conditions.

Another key characteristic of the SpectraLink PTC400 is its enterprise-grade security features. The device supports encryption protocols and secure access to corporate networks, ensuring that sensitive business communications remain protected against unauthorized access. This level of security is essential for maintaining compliance in industries that handle sensitive data.

In addition to its robust communication features, the PTC400 offers essential functionalities such as address book access, call hold, and transfer capabilities, making it a full-featured communication tool. It also supports various productivity applications designed specifically for enterprise use, allowing employees to access critical information and manage tasks right from their handheld device.

Moreover, the PTC400 is designed for endurance, featuring a long-lasting battery life that can sustain extended shifts without interruption. It is also equipped with standard charging docks and accessories, facilitating easy recharging and maintenance.

In conclusion, the SpectraLink PTC400 stands out as an ideal solution for enterprises seeking to enhance communication and collaboration among their workforce. With its advanced features, robust security, and user-friendly design, the PTC400 is poised to significantly improve operational efficiency and employee connectivity in a variety of industrial settings.
Top Page Image Contents