Multi-Stage Charging Overview

AC Power and Charging LED Status Indicators

The ProSport includes two LED indicators as shown below.

Green “AC Power” LED indicator:

When on, the green LED indicates that AC power is present.

Red “Charging” LED indicator

When on, the red LED indicates that the batteries are in the multi-stage charging mode. When charging is complete, only the green “AC Power” LED will remain on.

L.E.D. information

Green on = Power on

Red on = High charge on

Red off = Battery full, on float

When the ProSport charger is turned on, the green AC power indicator will turn on followed by the red charging LED indicator.

The multi-stage charger will provide the following:

ProSport Charging

During this mode the ProSport will use ist available charging amps (as controlled by temperature) until the battery voltage is raised to 14.6V DC (lead-acid factory setting).

ProSport Conditioning

The ProSport will hold batteries at 14.6V DC (factory set for lead-acid batteries) to complete charging while conditioning batteries by desulfating each battery connected. Upon completion the ProSport will go into float mode.

3. Float / Maintenance Mode

During this mode the red “Charging” LED will turn off, indicating that the charging process is over and that the charger is now maintaining your batteries on-board. Only the green LED will remain on, indicating “Power On / Float-Maintenance Mode”.

This is a precision 13.3 volts (lead-acid factory setting) finishing voltage that maintains each battery, perfect for short or long storage periods and never overcharging your batteries (step down voltage regulation mode).

Note: The only LED indicator that will we on during the float mode will be the green “Power On” LED indicator.

Average Voltage

			14.6V
	14
			13.3V
	13
Volts	12
Volts	Charging	Conditioning	Maintenance / Float Mode
	11