for which it is designed. Do not use the equipment for a purpose for which it is not intended.
14.Do not use the equipment if the Power Switch does not turn it on or off. Any equipment that cannot be controlled with the Power Switch is dangerous and must be replaced.
15.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the equipment. Such preventive safety measures reduce the risk of starting the equipment accidentally. Always unplug the equipment from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
16.Store idle equipment out of reach of children and other untrained persons. Equipment is dangerous in the hands of untrained users.
17.Maintain equipment with care. Do not use damaged equipment. Tag damaged equipment “Do not use” until repaired.
18.Check for breakage of parts and any other condition that may affect the equipment’s operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment.
19.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.
SERVICE
20.Equipment service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
21.When servicing equipment, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
Additional Battery Charger Safety Precautions
1.This Battery Charger must only be used on
2.Do not use the Battery Charger as a low voltage system power supply except in automotive applications.
3.Do not try to start the automobile engine when the Battery Charger is connected to the battery. It may damage the unit.
SKU 45005 For technical questions, please call | Page 4 |