INSPECTION and
MAINTENANCE
To prevent serious injury
from accidental operation or electric shock:
Before appliance inspection or maintenance, make sure the appliance’s switch is turned off, and the unit has cooled completely.
To prevent serious injury from Appliance failure:
Do not use damaged products.
BEFORE EACH USE, inspect the general condition of the Solar Security Light. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation.
1.When storing your Light indoors for more than 2 or 3 days, turn the ON/ OFF Power Switch to “OFF”.
2.Store the Light in a dry location free of dust and debris. Make certain that the Light is out of reach of children.
Storing the Light for prolonged pe- riods may damage the light or de- crease performance.
3.Keep the Solar Panel free from dirt and debris. A dirty Solar Panel will keep the batteries from charging.
Clean regularly with a damp cloth.
Replacing the Batteries
|
| Figure 3 | ||
Battery |
|
|
| Lamp |
|
|
| ||
Pack |
|
| Base | |
Motion
Detector
Head
1.The Battery Pack is located in the Base of the Lamp (1). Remove the screws that connect the base togeth- er. Separate the base as shown in Figure 3.
2.Replace with a
3.Connect base back together and at- tach to Lamp, making certain that the Motion Detector Head (see Figure
3)is facing in the correct direction. Note: Be careful not to pinch wires when
SKU 98085 | For technical questions, please call | Page 6 |