Figure 3-Supports to Support Post
Bolt (12) | Nut (2) |
| |
| Washer (34), |
Supports (11) | Spring Washer (35) |
| |
| Support Post (10) |
Nut (2) |
|
Washer (34), | Bolt (12) |
Spring Washer (35) |
|
Step 5) | Attach the Handle Grip (36) to the Support Post (10). Slide a Washer (6) and a Spring | ||
| Washer (7) onto each of four Bolts (27). Insert the Bolt (27) and Washers (6 and 7) through | ||
| Handle Grip (36) and tighten to Support Post (10) - see Figure 2. |
| |
Step 6) | Attach the Hydraulic Ram (21) to the bracket located toward the bottom of the Support Post | ||
| (10) - see Figure 4B below. Insert Bolt (17), then slide on Washer (32) and Spring Washer | ||
| (33). Tighten on Nut (18). Lean the Hydraulic Ram (21) against the Support Post (10) while | ||
| installing the Boom (13) in next step. |
|
|
Step 7) | Set the Boom (13) onto the top of the Support Post (10). Insert Bolt (14) through the holes, | ||
| then slide on Washer (30) and Spring Washer (31). Tighten on Nut (26) - see Figure 4A. | ||
|
| Washers | Bolt (22) |
|
| (32,33) | |
|
|
| |
Boom (13) |
| Nut (18) |
|
| Nut (26) | Support |
|
Bolt (14) |
|
| |
| Post (10) |
| |
| Washers (32 & 33) | Nut (18) | |
| Bolt (17) | ||
|
|
| |
| Support Post (10) | Washers |
| ||
|
| |
|
| (32,33) |
|
| Hydraulic |
|
| Ram (21) |
Figure 4A | Figure |
| REV 11/02; 05/05 |
Sku 46766 | For technical questions, please call | Page 5 |