Figure 2
3.Use the supplied Wrench to remove the Center Cover Fixing Bolt holding the Center Cover in place by turning it counterclockwise. (See Figure 2.)
Figure 3
4.Remove the Safety Screw. (See
Figure 3.)
Figurere45
5.Raise the Blade Guard and Center Cover. (See Figure 4.)
Figure 56
6.While holding in the Arbor Lock Button, use the Wrench to loosen the Arbor Bolt by turning it clockwise. (See Figure 5.)
Note: The Arbor Bolt has a left hand thread, so it loosens by turning clock- wise.
7.Remove the Arbor Bolt, Outer Flange and Saw Blade by pulling them straight off the Arbor.
SKU 98199 | For technical questions, please call | Page 15 |