Harbor Freight Tools 93351 operating instructions Sku

Page 6

8.WARNING! Never use plastic (PVC) pipe for compressed air. Serious injury or death could result. Any tube, pipe, or hose used must have a pressure rating higher than 150 PSI. Minimum recommended pipe size: Up to 50 feet long use 1/2” diameter. Greater than 50 feet use 3/4” diameter. Larger diameter pipe is always better.

9.This Air Compressor is not designed for outdoor use.

10.WARNING! This Air Compressor is extremely top heavy. The unit must be bolted to the floor with isolation pads (not included) or secured with a wall cable (not in- cluded) before operating to prevent equipment damage, injury, or death.

(See Illustration Below.)

WALL CABLE

 

 

 

WALL CABLE

 

 

(NOT INCLUDED)

 

 

 

(NOT INCLUDED)

 

 

ISOLATION PAD

ISOLATION PAD

 

 

 

(NOT INCLUDED)

(NOT INCLUDED)

 

 

 

11.

Make sure all tools and equipment used with the Air Compressor are rated to

 

the appropriate capacity. Do not use any tool or equipment that does not operate

 

from 85 PSI to 110 PSI.

 

 

12.

Drain the Air Compressor every day. Do not allow excessive moisture to build

 

up inside the Air Compressor’s Tank.

 

 

13.

Avoid injury. Never direct the Air Outlet Valve at people or animals.

 

14.

Do not alter or remove the Safety Valve (67). Do not open the Pressure Switch

 

Box (66).

 

 

 

15.

Do not handle the ON/OFF Knob (86) or Power Cord Plug with wet hands.

16.

Make sure the Air Compressor is located on a flat, level, sturdy surface capable

 

of supporting the weight of the Compressor, operator(s), and any additional

 

tools and equipment.

 

 

17.

Keep all electrical connections dry and off the ground.

 

18.

Industrial applications must follow OSHA guidelines.

REV 05/06

 

 

 

 

SKU 93351

For technical questions, please call 1-800-444-3353.

Page

Image 6
Contents HP AIR Compressor Work Area Product SpecificationsGeneral Safety Rules Save this ManualElectrical Safety Personal SafetyService Tool USE and CareSpecific Safety Rules SKU Figure a Grounding Grounded Tools Tools with Three Prong PlugsThis Product Uses a Prong Plug Symbology Double Insulated Tools Tools with TWO Prong PlugsAssembly Instructions UnpackingOperating Instructions Figure FFigure G Figure H INSPECTION, MAINTENANCE, and Cleaning Figure J Please Read the Following Carefully Troubleshooting Parts List Assembly Diagram