Harbor Freight Tools 93271 operating instructions Specifications, Save this Manual

Page 2

SPECIFICATIONS

Item

Description

 

 

Maximum Air Pressure

115 PSI with Auto Shut-Off

 

 

Air Tank Capacity

21 Gallons

 

 

Air Flow Capacity

3.5 CFM at 90 PSI

8.8 CFM at 40 PSI

 

 

 

Electrical Requirements

3 HP Rated Motor / 230 Volt / 60 Hz /

Single Phase / 7 Amps

 

 

 

Pump Stage

Single

 

 

Air Outlet Size

1/4” - 18 NPT

 

 

Shipping Weight

152 Pounds

 

 

Power Cord

20’

 

 

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1.KEEP WORK AREA CLEAN AND DRY. Cluttered, damp, or wet work areas invite injuries.

2.KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle this product.

3.STORE IDLE EQUIPMENT. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.

4.DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR DRUGS. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.

5.USE EYE, HAND, AND HEARING PROTECTION. Wear ANSI approved safety impact goggles, hearing protection, and heavy-duty work gloves when using this product.

REV 10/05

SKU 93271

For technical questions, please call 1-800-444-3353.

PAGE 2

Image 2
Contents GALLON, 230 VAC Save this Manual SpecificationsGeneral Safety Warnings and Precautions Industrial Applications Must Follow Osha Requirements Specific Product Warnings and Precautions To Check The Oil Level UnpackingOperating Instructions To Turn The Air Compressor OnTo Adjust The Air Output To The Pneumatic Tool Figure BTo Use The Tank Pressure Relief Valve To Empty Moisture From The TankINSPECTION, MAINTENANCE, and Cleaning Do not use damaged equipmentParts List a / Assembly Diagram Part Description QtyParts List B / Assembly Diagram B
Related manuals
Manual 11 pages 52.09 Kb