Harbor Freight Tools 45214 Specifications, Save This Manual, Safety Warnings and Precautions

Page 2

 

Specifications

 

 

 

Motor Power

2 HP, 3450 rpm

 

 

 

Electrical

120V, 12 amps, 1400 watts, Single Phase, 60 Hz

NPT Air Outlet

1/4” NPT

Air Tank Size

3.5 Gallon

Maximum PSI

125 psi

Pressure Range

Pressure Switch on at 80 psi, off at 110 psi

Air Delivery (cfm)

5 @ 40 psi / 4.5 @ 70 psi / 3.8 @ 90 psi / 3.0 @ 110 psi

 

Pressure Disconnect

Automatic at 170 psi

Pump Stage

Single

Oil Requirement

Standard non-detegent, 30 weight compressor or motor oil

 

Optimal capacity for oil tank is 7.8 ounces.

 

 

 

 

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capacity.

6.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. Do not modify this tool and do not use this tool for a purpose for which it was not intended. Do not use to fill air/breathing tanks.

SKU 45214

Page 2

REV 02/04

Image 2
Contents Model Save This Manual SpecificationsSafety Warnings and Precautions Page Unpacking Operation Re-check the oil levelMaintenance Replace the oil. See the topParts List Please Read the Following CarefullyParts List Assembly Drawing SKU REV 11/01 REV 02/04