About Your Monitor: Dell 1908WFP For Dell Flat Panel Monitor User'sGuide
2 | Dell Soundbar | Connect the power cord for the Soundbar (optional). |
| power |
|
| connector |
|
3 | DVI connector | Connect your computer DVI cable. |
4 | VGA | Connect your computer VGA cable. |
| connector |
|
5 | USB upstream | Connect the USB cable that came with your monitor to the monitor and the computer. |
| connector | Once this cable is connected you can use the USB connectors on the side and bottom of the |
|
| monitor. |
6 | USB | Connect your USB devices. |
| connector |
|
NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor.
Side View
USB connectors (downstream)
Left view | Right view |
Monitor Specifications
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes | Horizontal Sync | Vertical Sync | Video | Power Indicator | Power Consumption | |
Normal operation (with Dell Soundbar and USB active) | Active | Active | Active | Green | 75 | W (maximum) |
Normal operation | Active | Active | Active | Green | 32 | W (typical) |
Inactive | Inactive | Blanked | Amber | Less than 2 W | ||
Switch off | - | - | - | Off | Less than 1 W |
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed when in
or
file:///T/htdocs/monitors/1908WFP/en/ug/about.htm[10/31/2012 11:33:23 AM]