Solving Problems: Dell 1908WFP Flat Panel Monitor User's Guide
Missing Pixels | LCD screen has spots |
Brightness Problems | Picture too dim or too bright |
Geometric Distortion | Screen not centered correctly |
Horizontal/Vertical | Screen has one or more lines |
Lines |
|
Sync Problems | Screen is scrambled or appears torn |
LCD Scratched | Screen has scratches or smudges |
Safety Related Issues | Visible signs of smoke or sparks |
Intermittent Problems | Monitor malfunctions on and off |
Image Retention (from | Faint Shadow from the static image |
a static image) | displayed appears on the screen |
Adjust Phase and Clock controls via OSD.
Perform monitor reset.
Check environmental factors.
Relocate and test in another room.
Cycle power
These are pixels that are permanently off and this is a natural defect that occurs in LCD technology.
Perform monitor reset.
Push Auto Adjust button.
Adjust brightness & contrast controls.
Perform monitor reset on "Position Settings Only".
Push Auto Adjust button.
Adjust the centering controls.
Ensure monitor is in proper video mode.
Perform monitor reset. Push Auto Adjust button.
Adjust Phase and Clock controls via OSD.
Perform monitor
Perform monitor reset. Push Auto Adjust button.
Adjust Phase and Clock controls via OSD.
Perform monitor
Boot up in the "safe mode".
Turn monitor off and clean the screen.
For cleaning instruction, see Caring for your Monitor.
Do not perform any troubleshooting steps.
Monitor needs to be replaced.
Ensure monitor is in proper video mode.
Ensure video cable connection to computer and to the flat panel is secure.
Perform monitor reset.
Perform monitor
Use the Power Management feature to turn off the monitor at all times when not in use. Alternatively, use a dynamically changing screensaver left on the monitor for a long period of time.
Product Specific Problems
SPECIFIC SYMPTOMS
Screen image is too small
Cannot adjust the monitor with the buttons on the front panel
WHAT YOU EXPERIENCE
Image is centered on screen, but does not fill entire viewing area.
OSD does not appear on the screen.
POSSIBLE SOLUTIONS
Perform monitor reset on "All Settings."
Turn off the monitor, unplug the power cord and then plug back and turn on the monitor.
file:///T/htdocs/monitors/1908WFP/en/ug/solve.htm[10/31/2012 11:34:36 AM]