Harbor Freight Tools 42933 operating instructions SKU For replacement parts, please call

Page 10

4.Set the Saw Blade angle to 0 degrees index position (perpendicular to the worktable).

5.Draw out the Saw Blade to mid-range on the Carriage Arm and lock in that position.

6.Turn the Elevating Handle to lower the Saw Blade so it just touches the plywood top.

7.Place your hand on the Handle Assembly (87) and press the green ON button with the other hand. Squeeze the Trigger (86) to start the motor.

8.With the same hand that you turned ON the machine, loosen the Carriage Lock Knob and slowly move the Saw Blade back, cutting the rip fence; and then move it all the way forward, cutting a groove into the entire depth of the plywood.

9.With the machine still running, turn the Elevating Handle 1/4 turn, lowering the Saw Blade a little more. Pull the Handle back and forth again to cut the plywood groove a little deeper. Tighten the Carriage Lock Knob again.

10.With the machine still running, loosen the yoke Clamp Handle (66) and pull out the Yoke Index Knob and turn the yoke clockwise until it locks into the 90 degree.

This cuts a swing line into the worktable for in-ripping.

11.Once the quarter turn (swing line cut) is complete, lock the yoke Clamp Handle. With the Saw Blade still turning, push on the Handle until the Saw Blade reaches the rip fence, cutting the rip trough in the center of the worktable.

12.Turn the machine OFF and return the Saw Blade to the crosscut position. Lock the Carriage Lock Knob.

13.Turn the machine ON and rotate the Yoke counterclockwise to the out-rip position. This cuts the swing line for out-ripping. Loosen the Carriage Lock Knob.

14.Lock the yoke Clamp Handle (66) and, with the Saw Blade revolving, push the Handle back until the new groove matches the groove cut in step 11. Turn the machine OFF.

15.Return the Saw Blade to the crosscut position. Unlock the Carriage Lock Knob (74b) and move the motor assembly to the rear position, behind the fence. Pull out the Bevel Index Knob (74) and lock the Saw Blade at index position 60 degrees. Turn on machine and pull the Handle forward. This will cut a kerf mark for bevel crosscuts. Turn the machine OFF.

16.Lock the Carriage Lock Knob and start the motor. Pull the Carriage Arm Index Lock Knob and move the Arm to the 45 degree right-hand miter position. This will cut a groove for miter cuts. Turn the machine OFF.

SKU 42933

For replacement parts, please call 1-800-444-3353.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions and replacement parts, please call 42933Read all instructions before using this tool SpecificationsSafety Warnings and Precautions SKU For replacement parts, please callSKU For replacement parts, please call Safety Precautions When Using Radial Saws SKU For replacement parts, please call Installation UnpackingOperating Controls Adjustments Preparing the Work Table a SKU For replacement parts, please call Cross Cutting OperationMitre Cross Cutting Compound Cross Cutting Bevel Cross CuttingIn-Rip Cutting Out-Rip Cutting Maintenance Troubleshooting Problem Cause SolutionParts List Part Description QtyAssembly Diagram Assembly Diagram Please Read the Following Carefully

42933 specifications

Harbor Freight Tools is renowned for its extensive selection of high-quality tools and equipment at affordable prices. Among its impressive lineup, the Harbor Freight Tools 42933 stands out as a versatile and powerful solution for various cutting and grinding tasks. This tool is particularly popular among DIY enthusiasts, professional contractors, and hobbyists due to its robust performance and ease of use.

One of the main features of the Harbor Freight Tools 42933 is its powerful motor, which provides consistent performance across a wide range of applications. With variable speed control, users can easily adjust the RPM (Revolutions Per Minute) to match the specific requirements of their tasks. This feature allows for greater precision when cutting or grinding different materials, ensuring optimal results every time.

The Harbor Freight Tools 42933 also boasts a durable construction that ensures longevity and reliability. Designed to withstand the rigors of daily use, it is built with high-quality materials that resist wear and tear. The ergonomic design enhances comfort during prolonged use, reducing user fatigue and making it easier to handle intricate jobs.

The tool is equipped with advanced safety features, including an integrated safety switch that prevents accidental starts. This attention to safety is essential for users who frequently work in demanding environments where risks are prevalent. Additionally, the lightweight design allows for easy maneuverability, making it ideal for both indoor and outdoor projects.

Another remarkable aspect of the Harbor Freight Tools 42933 is its versatility. It is compatible with a wide range of accessories, enabling users to perform various applications, such as cutting wood, metal, and plastics, as well as grinding and polishing surfaces. This adaptability makes it a valuable addition to any toolbox, catering to both novice and experienced users alike.

Overall, the Harbor Freight Tools 42933 combines power, versatility, and safety features to deliver reliable performance for various tasks. Its ergonomic design and durable construction make it a top choice for those seeking an efficient tool that offers excellent value for money. Whether you're tackling home improvement projects or professional jobs, the Harbor Freight Tools 42933 is equipped to meet your needs, enhancing your efficiency and productivity.
Top Page Image Contents