Harbor Freight Tools 47003 Assembly and Operating Instructions, Assembly Diagram on

Page 10

20. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

21. WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

ASSEMBLY AND OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the

Assembly Diagram on page 18.

To Remove Or Install A Cut-Off Wheel:

1. WARNING! Prior to performing any assembly procedures, make sure the Power Cord (65) of the Cut-Off Saw is unplugged from its electrical outlet. Also, make sure the Cut-Off Wheel has completely cooled and wear work gloves while replacing the Wheel.

2.Place the Cut-Off Saw in its fully raised position. To do so, turn the Swing Lock Handle (81) clockwise while pushing down on the Handle (66, 71).

(See Figure D, next page.)

SKU 47003

PAGE 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents For technical questions and replacement parts, please call Heavy Duty CUT-OFF SAWUnpacking Product SpecificationsGeneral Safety Rules Save this ManualWork Area Personal SafetyTool USE and Care Electrical Safety ServiceGrounding Grounded Tools Tools with Three Prong PlugsSee Figure B, next Extension CordsSee Figure B Symbology Figure BSpecific Safety Rules SKU Assembly Diagram on Assembly and Operating InstructionsSee Figure D, next Figure D Figure ESee Figure G See Figures G and HQuick Lock Vise See Figures D, and J See FigureSee Figure J INSPECTION, MAINTENANCE, and CleaningDo not use damaged equipment Please Read the Following Carefully Parts List Description QtyAssembly Diagram
Top Page Image Contents