23.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
SERVICE
24.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
25.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Tile Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Always wear ANSI approved safety impact eye goggles and heavy work gloves when usingthe Tile Saw. Using personal safety devices reduce the risk for injury. Safety impact eye goggles and heavy work gloves are available from Harbor Freight Tools.
3.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
4.Always keep the extension cord away from moving parts on the tool.
5.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Tile Saw
6.Do not force the Tile Saw. This tool will do the work better and safer at the speed and capacity for which it was designed.
7.Never leave the Tile Saw unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
SKU 92658 For technical questions, please call | Page 5 |