ASSEMBLY INSTRUCTIONS
To Install A Saw Blade:
1.
CAUTION! Always make sure the Power Switch (29) of the Jigsaw is in its “OFF” position and the tool is unplugged from its electrical outlet prior to adding any accessories or making adjustments to the tool.
2.Refer to the Chart below to select the proper Saw Blade (68, 69) for the material being cut. (See Figure F.)
3.Open the Plastic Blade Guard (58). Press the clamp button on the Blade Chuck (24). Insert the Saw Blade (68, 69) as far as it will go, making sure the teeth of the Saw Blade face to the front of the tool. Then release the clamp button on the Blade Chuck, and close the Plastic Blade Guard. (See Figure G.)
BLADE SELECTION AND SUITABLE SPEED
Material | Teeth Per Inch | Speed Setting |
Soft Wood | 6 | 6 |
Hardwood | 6 | 5 |
Plastic | 12 | 4 ~ 6 |
Aluminum | 12 | 3 ~ 6 |
Steel | 24 | 2 ~ 4 |
Tile | 24 | 1 ~ 3 |
Glass | 32 | 1 ~ 3 |
Leather | (Knife Edge) | 4 ~ 6 |
Rubber | (Knife Edge) | 4 ~ 6 |
FIGURE F
SAW BLADE
(68, 69)
PLASTIC BLADE GUARD
(58)
BLADE CHUCK
(24)
FIGURE G
SKU 94560 | For technical questions, please call | PAGE 12 |