3.With assistance, pull the spring loaded Moveable Guard (6) up to its highest posi- tion and hold it in place. (See Figure C.)
HANDLE | HOUSING (22, 44) |
POWER SWITCH (42)
MOVEABLE GUARD (6)
FIXED VISE (57) | 6” | |
WITH ANGLE SCALE | ||
CUTOFF | ||
|
GRINDING WHEEL (NOT PROVIDED)
KNOB (47)
BASE (60) | MOVEABLE CLAMP (55) |
|
CUTTING SLOT
FIGURE C
4.Insert Spanner (45) into the access slot behind Guard (9), so that it engages the flats on the Spindle, and hold it firmly.
5.Use Wrench (46) to remove (CCW) the Outer Flange (1) from the Spindle.
6.Note: This saw accepts wheels with 2 different arbor sizes: 5/8”, 7/8”.
5/8” Arbor: | Place the Wheel directly onto the spindle without using the Inner Flange |
| (3). Place the Flange on the spindle with the step facing away from |
| the cutoff wheel. |
7/8” Arbor: | Install the Inner flange with the step facing the cutoff wheel. Place the |
| Wheel onto the spindle over the Inner Flange (3). Place the Flange |
| on the spindle with the step facing the cutoff wheel. |
Check to ensure that the wheel is positioned correctly, then firmly tighten the Outer Flange.
7.Allow the Moveable Guard (6) to return to its down position. (See Figure C.)
REV 01/04; 01/05; 12/05
SKU 41453 | For technical questions, please call | PAGE 7 |