Harbor Freight Tools 40315 operating instructions See Figure F

To Attach The Star Knob:

1.The Star Knob (53) is used to lock the Cutting Guide (57) in position. The Cutting Guide is used to set the desired width of cut when cutting a workpiece.

(See Figure F.)

2.To attach the Star Knob (53), place the Cutting Guide (57) on the Table (51) of the Tile Saw. Place the Clamping Plate (56) behind the edge of the Table. Insert the threaded portion of the Star Knob through the Cutting Guide and screw the Star Knob into the Clamping Plate. (See Figure F.)

			EDGE OF
CUTTING GUIDE				TABLE
	(51)
(57)
			STAR KNOB
	(53)
CLAMPING PLATE
(56)		FIGURE F

To Prepare To Cut:

1.Fill the Tray (17) with water and carefully slide the Tray under the Cutting Wheel Blade (8). Make sure the water level is deep enough to cover the lower edge of the Cutting Wheel Blade, but not so deep as to spill over the edge of the Tray. (See

Figure G.)

TABLE

(51)

CUTTING WHEEL BLADE

(8)

CUTTING GUIDE

(57)

POWER SWITCH				TRAY
			(17)
	(21)	STAR KNOB
FIGURE G		(20)
		STAR KNOB (53)

SKU 40315 For technical questions, please call 1-800-444-3353. Page 13