or other part that is damaged should be properly repaired or replaced.
20.DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
21.NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a complete stop.
Grounding Instructions
To prevent electric shock
and death from incorrect grounding wire connection Read and follow these instructions:
Tools: Tools with Two Prong
Plugs
Outlets for 2-Prong Plug
1.To reduce the risk of electric shock, double insulated equipment has a po- larized plug (one blade is wider than the other). This plug will fit in a polar- ized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See
Outlets for
Miter Saw Safety Warnings
For Your Own Safety Read Instruction Manual Before Operating Miter Saw
1.Wear eye protection.
2.Keep hands out of path of saw blade.
3.Do not operate saw without guards in place.
4.Do not perform any operation free- hand.
5.Never reach around saw blade.
6.Turn off tool and wait for saw blade to stop before moving workpiece or changing settings.
7.Disconnect power before changing blade or servicing.
8.Return all guards to original position if any are moved during blade replace- ment. Check all guards for proper operation after service.
9.Do not operate with ANY guard disabled, damaged, or removed. Moving guards must move freely and close in- stantly.
10.The use of accessories or attach- ments not recommended by the manufacturer may result in a risk of injury to persons.
11.When servicing use only identical replacement parts.
SKU 42307 | For technical questions, please call | Page 4 |