HandHeld Entertainment 7900 quick start Accessing the Net Base Through a Browser

If Your Network Does Not Support DHCP or

You Want to Configure the Net Base with a Static IP Address

1.Connect the serial cable to the Serial DB-9 Connector on the back of the Net Base and a COM port on the host computer. Do NOT connect to the network at this time.

2.On the PC, start Hyperterminal. Use these settings: 115200 bps, 8,N,1.

3.Wait until login prompt displays on Hyperterminal.

4.Enter the user name <handheld> and default login password <handheld> to log into network.

************************************************

* Welcome to the Hand Held Products Net Base *

************************************************

SD00032Login: handheld

Password: ********

1)View System Configuration

2)View Current Values

3)Express Setup

4)Advanced Setup

5)System Statistics

6)System Diagnostics

7)Help

x) Exit

Enter choice: 3

5.Enter choice 3 (Express Setup) and enter the configuration information requested at each prompt.

6.Press OFF on the power adapter and reconnect the Ethernet cable.

7.Press ON on the power adapter. The Net Base boots up using the configuration information entered in Step 5.

Accessing the Net Base Through a Browser

After you have successfully configured the Net Base, you can access and configure it through your browser.

1.Open your browser.

2.In the Address line, type the IP address assigned to the Net Base and press ENTER. The login screen appears.

6 Dolphin® 7900 Series Net Base Quick Start Guide