HandHeld Entertainment 7900 quick start Using the Wall Mount Kit

Page 14

3. Secure the DIN Rail to the horizontal mounting surface.

Using the Wall Mount Kit

Wall mount kits can be purchased separately to secure the Net Base to a wall or other vertical surface. You need to purchase two kits so that you have two mounting brackets, one for each end of the Net Base. Each mounting bracket contains an open slot in the back to accommodate the connector cables.

1.Insert the round end of a screw into the round end of each screw slot. Slide each screw towards the narrow end of the slot.

2.Use one washer/nut set on each screw to secure the screw in each slot. Washer/nut sets and screws in slots

10	Dolphin® 7900 Series Net Base Quick Start Guide

Image 14

Contents Quick Start Guide Disclaimer Table of Contents Page Introduction Unpacking the Dolphin Net BaseBack Panel Hardware OverviewFront Panel Bottom PanelSetting up the Net Base Power SupplyDock LED Configuring the NetworkLEDs If Your DNS Server Supports Bind 8.3 or LaterIf Your DNS Server Does Not Support Bind 8.3 or Later Accessing the Net Base Through a Browser Online Help Links in the Left ColumnApplications on the Dolphin Terminal Connecting the Dolphin Terminal to the Net BaseCharging Using the DIN Rail Mounting OptionsUsing the Wall Mount Kit Dolphin 7900 Series Net Base Quick Start Guide Product Service and Repair Online Product Service and Repair AssistanceOnline Technical Assistance Limited WarrantyTechnical Assistance North America/CanadaDolphin 7900 Series Net Base Quick Start Guide Page Hand Held Products, Inc